Top view of the Ultimate Ears Wonderboom 2 speaker with its Bluetooth pairing button circled.
To pair your Wonderboom 2 speaker with a Bluetooth source device for the first time, or to update stale connection information in that device, you have to know how to start pairing mode on the speaker. Why? Because in this mode, the speaker transmits its name and currently valid connection data over the Bluetooth airwaves, which enables other nearby Bluetooth devices to pair to it. So in this post, we show you how to put the Wonderboom 2 speaker into pairing mode, to allow you to link it with phones, tablets, computers, and smart speakers.
Firstly, turn on the speaker by rapidly pressing its Power button.
E.g. See this button that we point at with the yellow arrow, in the next picture.
The speaker then comes on, as pictured next.
Secondly, to be able to discover your speaker on your source Bluetooth device, place it into pairing mode. For that, press and hold the the Pairing button, as circled in the next picture.
When you press this Pairing button, the speaker makes a cool pairing sound. Plus, a lamp in this button starts rapidly flashing white. See this in the last picture, circled in yellow.
Finally, while the Pairing button is blinking, the Wonderboom 2 is now in pairing mode. So you should see your Wonderboom 2 on any in-range phone, computer, tablet, or smart speaker, that is within several feet of it, as shown next.
Gives the iPod Touch hard reset procedure. Now a hard reset restores all settings to…
Shows how to pair Amazon Echo to Bluetooth speakers. These include the generation 1 and…
Many speakers including this one, feature a status light that glows red while charging /…
Many speakers, including this one, feature a status light that glows red while charging /…
Here we cover the Amazon Echo Dot 3rd generation power cable specs. This is the…
The Sony SRS XB32 speaker charging indicator is a small LED light in the back…