You may wish to know how to reset Alexa Echo Gen 2 Dot speaker. Why? Because perhaps you want to sell your old Alexa to a friend. Or perhaps you just want to connect it to a different Amazon account, or to a different wireless network. So, to that end, to reset your Alexa Echo Dot to factory default condition, perform the following steps.
Resetting unlinks the speaker from its current Amazon Alexa account, and assures that it forgets its current Wi-Fi connection information. So be warned that after the reset, your Alexa Echo Dot speaker will not work until it’s been properly set up again.
Note that the factory reset routine for all Alexa Echo devices is roughly the same. It’s just the location of the reset button on each is different. Furthermore, some don’t have a dedicated reset button, as is the case for this Gen 2 version of the speaker.
First, connect the Echo Dot to its USB power adapter. The light ring will illuminate blue for a time, and then go out, indicating that boot up has completed.
See our Where is the Echo Dot Reset Button post, for details on how to find the reset button on the 1st and 2nd generation Echo Dot devices.
Anyway, once the light ring goes completely dark, for the Dot 2, press and hold the Mic Off and Volume Down buttons at the same time.
Then, keep holding in the buttons until, after several-seconds, the light ring goes completely dark for a few seconds, and then turns orange.
Finally, your Echo Dot speaker has now been reset to its factory default settings and has entered setup mode.
You may now unplug, pack, and give your Echo Dot to someone else without fear that they’ll have access to the Alexa settings on your personal Amazon account. Those prior values have now been erased from the your Echo Dot. Or, you can set it up once again on your existing account. Once the light ring turns orange, the unit remains in setup mode until someone executes the published setup procedure. The Echo Dot will not function until properly set up and linked to an Amazon account.
The JBL Go 2 speaker by Harman Kardon is a low power, hand-held style unit…
Shows how to fix Honeywell wireless thermostat connection failure issues. You might see these on…
Shows how to connect HP DeskJet 3630 series to WiFi. Note that doing this will…
Here, we show how to reset the Wonderboom speaker version 2. which returns it to…
We give here the JBL Clip reset directions, that return it to its default settings…
The JBL Boom Box JBL by Harman Kardon is a moderate to higher power, boom…