How to Turn On JBL Flip 6

We explain how to turn on JBL Flip 6 here.  Now most speakers have a Power button that they prominently position on the unit so it’s easy to find.  Indeed, this speaker is no exception to this pattern, as we find its Power button on the button panel.

There’s also a status lamp inside the Power button, that starts glowing when the speaker powers up.

This lamp is dark when the speaker is OFF.

How to Turn On JBL Flip 6

To power up this speaker, press the Power button. Then release after a quarter second or so.  Moreover, you needn’t hold it in for too long. The unit sees presses right away and then turns itself on.

When the speaker comes on, the status lamp glows. Plus the unit makes a rising pitch guitar strum.

Now pressing the Power button may not start up the speaker. Or the battery gauge blinks red. Both these symptoms  could be that the speaker needs a recharge.  So if the unit won’t come on, try connecting a charger.  You can indeed play the speaker while it charges. Or you may have a bad charger or charger cable.  The battery could be faulty too. Or, the unit may be in Service Mode. We discuss all of these issues  here, and how to resolve them.

But if after all these checks the speaker still does not turn on, then the unit itself may be defective. In that case, get a new one. Or get someone to repair it for you.  Or tackle the job yourself if you can get the parts you need.

Other Posts About the JBL Flip 6

1. 1. How to Hard Reset
   2. Buttons Manual
   3. How to Use the Volume Control
   4. How to Connect to an iPhone
   5. Pairing the JBL Flip 6

References

1. 1. Official Flip 6 Product Page
   2. Where to Buy the JBL Flip 6