JBL Clip 2 Bluetooth speaker, front view, horizontal.
You charge JBL Clip 2 speaker via the hidden micro USB charge port. And to get the quickest charging time and fullest charge when the JBL Clip 2 runs low on energy, recharge it with a medium to high current USB charger.
According to the specs for this speaker the time it takes to charge the JBL Clip 2 BT speaker is two hours and thirty minutes (2.5 hours).
On a complete charge, the JBL Clip 2 speaker can play for up to five (5) hours, due to its 730 MaH, 3.7 volt lithium ion polymer battery. But when you play it loudly, especially with extra bass, you may experience somewhat shorter playing power.
We’ve seen this speaker run dead in around four hours when played at louder volumes. So to get the most charge time from it, power saving is key. Just play it only as loudly as you need to, to hear it well throughout your listening space.
If you own this speaker over a few to several years, you may notice that the time it plays from a single charge shrinks as the speaker gets older. This is normal for devices like this one, that rely on lithium ion batteries.
But by exercising the battery, you can slow this charge drop off.
To work the JBL Clip 2, run the battery dead and charge it again every three to six months when not in use.
Also, we recommend that you not leave the speaker plugged into a charger once it has reached full charge. Right after the charging lamps completely shut off, disconnect the speaker as soon as you can, to avoid overcharging it and damaging the battery.
The JBL Go 2 speaker by Harman Kardon is a low power, hand-held style unit…
Shows how to fix Honeywell wireless thermostat connection failure issues. You might see these on…
Shows how to connect HP DeskJet 3630 series to WiFi. Note that doing this will…
Here, we show how to reset the Wonderboom speaker version 2. which returns it to…
We give here the JBL Clip reset directions, that return it to its default settings…
The JBL Boom Box JBL by Harman Kardon is a moderate to higher power, boom…