This post offers JBL speaker Bluetooth pairing instructions. We demo this pairing on and iPad. But slight adjustments to these also work with Android devices. These directions work for most JBL Bluetooth speakers, including the following lines…
For this demo, we show how to pair using the JBL Flip 4 speaker. Enjoy.
With your speaker powered off (the Power button is dark), run through this routine to pair it to your mobile device.
Firstly, press the Home button to bring up the device’s Home screen.
We found ours on the second page of the iPad Home screen as shown next.
Thirdly, tap the Settings app icon.
The mobile device then displays the first page of its settings, as shown in the next step.
The Bluetooth Settings screen displays as follows. Note that our Bluetooth is enabled here. But since our JBL speaker is ON at the moment, it does not show up in the Bluetooth devices list. Also, we don’t see it since we’ve never paired our speaker with the iPad Air before. See this as shown in this list of earlier paired Bluetooth devices, shown next.
Next, turn on the speaker by quickly pressing its Power button. See this circled in green, in the next shot.
The speaker then powers up.
But since our iPad does not know about this speaker, the Flip 4 will not auto pair with it. The light that comes on in the power switch denotes this not-paired state by glowing solid white, as shown next. Other Bluetooth speakers have similar lights.
Now, to see your JBL speaker on your Bluetooth device, place the speaker into Bluetooth discovery mode. To do that, press and release the Bluetooth button, as shown in the next picture. All JBL speakers have this button.
When you press the Bluetooth Discovery Mode button, the speaker makes a repeating single pluck guitar note sound several times. Again, other JBL speakers make similar noises when you put them into discovery mode. Further, the power button on our speaker here changes from a solid white glow to flashing blue. See this next.
See the screen shot next. In fact, we found ours, as pointed at by the purple arrow.
Tap the listed speaker in the Other Devices section of the Bluetooth devices list.
Your Bluetooth mobile device then pairs with the JBL speaker (“Tom’s Flip 4” in this demo).
The device’s Bluetooth Settings screen then changes to look something like the following.
Finally, we have now successfully paired our JBL speaker with our iPad mobile device.
Shows how to pair Amazon Echo to Bluetooth speakers. These include the generation 1 and…
Many speakers including this one, feature a status light that glows red while charging /…
Many speakers, including this one, feature a status light that glows red while charging /…
Here we cover the Amazon Echo Dot 3rd generation power cable specs. This is the…
The Sony SRS XB32 speaker charging indicator is a small LED light in the back…
Here we cover the Echo Dot 3rd generation power adapter specs. This is the wall…