Sony SRS XB33 speaker front left view.
We offer here our Sony speaker hard reset instructions for typical models in this line, to return them to their out-of-the-box settings. Hard resetting to factory default state restores most any Sony speaker to a fresh, known-good state. Plus, it erases any earlier paired Bluetooth devices from its memory. Thus, deleting these stops this speaker from pairing to any nearby Bluetooth devices. Also, you might reset to get the speaker ready for sale or re-gifting, or to stop it from pairing wirelessly with devices you no longer wish it to connect with.
Press and release the Power button for a half-second or so. In this demo, we’re using the SRS XB31 speaker. But most other Sony speaker models also have a Power button and work the same as described below. So on your speaker, find the Power button as we see in the next picture.
Find the Power button, as shown in the last picture above.
Then, the status light comes on, as shown next.
The speaker may make a ding-dong tone sound when it powers up, to announce that it has paired, should it connect to a nearby device. Or it may make no sound whatsoever if it does not. But whether the unit pairs or not, this hard reset procedure works the same way, as follows.
Find these buttons as shown next. In our demo, they are both on the top button panel, as we point out in the next picture.
The Sony speaker then enters the hard reset process.
Then after around five seconds, the speaker powers OFF. Furthermore, the status lamp goes dark, as shown next. So release the buttons at this point. Note that on many Sony speakers, there is no power-down sound even though the unit does indeed power OFF.
Next, power on the unit again, as we describe in step 1 above.
Note that after hard reset, the speaker comes up in pairing mode. The Pairing Mode lamp quickly flashes to let you know this. E.g. See this in the next picture.
This is a signal that you may then look for this speaker on a nearby BT device, and pair to it if you so desire.
The reset is done. So you may now sell or gift the speaker, or pair it again with your favorite Bluetooth devices.
After a hard reset, the Sony speaker no longer automatically connects with any Bluetooth device. So to restore auto linking, you first pair it manually with a device. Then after that, any time that both speaker and that device have Bluetooth turned on, and are in range, pairing automatically occurs once more.
Many speakers including this one, feature a status light that glows red while charging /…
Many speakers, including this one, feature a status light that glows red while charging /…
Here we cover the Amazon Echo Dot 3rd generation power cable specs. This is the…
The Sony SRS XB32 speaker charging indicator is a small LED light in the back…
Here we cover the Echo Dot 3rd generation power adapter specs. This is the wall…
You must know how to set the Echo speaker to pairing mode to connect it…