UE app on iOS displaying its -Firmware Update Success- window.
Here, we show how updating firmware on UE Roll speaker works on the this Ultimate Ears portable Bluetooth speaker. Note that this upgrade can take up to five minutes depending on the speed of your internet. Plus, it cannot easily be undone. So you won’t be able to downgrade to the last firmware version once you complete this updating. Therefore, be sure that you indeed wish the update and have thought through all of its possible problems before going ahead with it.
You must have an internet connection, a Bluetooth enabled mobile or desktop computer device, and the UE app, as well as the UE Roll speaker.
So before doing anything else, connect your mobile device to the internet and install the UE app if you haven’t already.
Also, plug your UE Roll into AC power. Why? Because we don’t want its battery running low during the updating. Unfortunately, this oversight could corrupt the firmware in the speaker’s memory, and thus, brick the speaker, leaving it useless.
Then, pair your mobile device with the Roll.
You are now ready to begin the firmware updating process.
We found ours on the fourth home page in our iPad, as seen next.
Secondly, the app finds your paired UE Roll Bluetooth speaker and shows you its status screen. Shown next.
Note the red notification circle with the number 1 inside in the bottom right corner of the page, as circled in green. This means that there are important messages about this speaker pending for your to read and act upon.
Note that if there are no current messages or firmware updates, then there will likely be no notifications. The red circle does not appear in that case.
Tapping the More hamburger control brings up the More screen. Note the fourth menu item down from the top, about the UE Roll. This tells us that a firmware update is available.
Touching Update Now brings up the Updater screen, as shown next.
Touching the Install item brings up the UE Roll firmware upgrade confirmation prompt page, as shown next.
Tapping Update begins the firmware update process on the speaker. To show this, the app displays the Update In Progress page, as shown in the next few screen shots.
Copying the file from the internet to the speaker is the slowest part of the firmware upgrade process. But as shown in these screenshots, the UE app shows a percentage number that increases in value from zero to a hundred percent as the firmware update proceeds.
We’re probably about a minute into the firmware updating at this point.
The next screen shows that the UE Roll firmware updating process is fifty percent finished.
Watch the power light on the speaker, as shown next. After a bit, it goes dark, as shown next, pointed at by the green arrow.
The speaker may or may not turn itself back on again. Ours did. But if yours did not power up again after the upgrade, then go ahead with the next step (Step 10). But if yours DID come online again, then skip Step 10 and pick up with Step 11.
Press the dark Power button to turn this Bluetooth speaker on again. It should again pair with your mobile device where you’re running the UE app. The Power button turns solid white, as shown next.
Also, the Bluetooth button glows solid white as shown above, circled, when the speaker pairs with a source Bluetooth device.
Once the UE Roll comes back on after updating the firmware finishes, the UE app shows a firmware update success message, as seen next.
The app then displays the UE Roll status screen once again. But now, please note that there’s no longer the red circle symbol as shown next. This means that the firmware update succeeded. So the speaker is now running the current firmware version.
Finally, you have now successfully updated the firmware to the latest version in your UE Roll portable Bluetooth speaker.
You may experience Wi-Fi connection errors when booting your original Google Home speaker. Or, the…
The JBL Charge 3 features several controls and lights across its top, as well as…
Here we give the hard reset Google Home Mini speaker routine. You might hard reset…
You can hard reset all of the smart speakers in the Google Home family. These…
Covers How to Hard Reset Google Home. Now you can reset this original version of…
Gives the iPod Touch hard reset procedure. Now a hard reset restores all settings to…