Amazon Alexa Echo Generation 1 smart speaker AC power adapter, showing the wall part, held In hand.
Here, we give the AC power adapter specs for the original Amazon Echo Generation 1 Alexa smart speaker. Now the US version of this adapter has non folding AC prongs. It also has a six-foot long attached cord, and is quite light for its 21 watt power output. Furthermore, it’s square yet modest width and height allows easy fitting into power strips or wall outlets. And finally, It does not block close by sockets, as shown next.
It puts out 21 watts to the speaker with quiet running. It offers stable voltage, so the speaker can pump out deep bass, crisp treble, and good volume range.
This is by no means a cheapo AC power plug. Indeed, it runs with low heating even at higher volumes. Plus, it makes little if any RFI and EMI noise.
But they did not build this plug with repair in mind. Indeed, the low cost of this switch mode wall adapter really makes fixing these a thing of the past.
Model: PS73BR. LO P/N: PA-1210-1AW1. Input: 110-240 volts, 50-60 Hz., 0.5 Amps Max. Output: 15 volts at 1.4 Amps. UL Listed: 9T54. For indoor use. Polarity: Positive center on the DC output “barrel” plug.
Next, the DC output plug, the metal barrel part, is about 10 mm long, with an outer roundness of 4 mm.
Now the positive lead hole at the plug top is roughly 3 mm round.
Further, this power supply, with its cable and plug, weighs in at around 4 ounces.
We've brewed several tens of pots of coffee in our Farberware automatic coffee maker. We've…
We've brewed several tens of pots of coffee in our Farberware automatic coffee pot. We've…
Why would you need to perform Honeywell RTH8580WF WiFi setup for this common thermostat ? …
Gives a safe routine to defrost a freezer fast with a heat gun. now a…
You can charge the JBL Clip 3 conveniently via the hidden USB charge port. Here,…
The Charge 3 JBL comes with an AC charger adapter, whose specs , type, and…
