This post shows Connect the UE Wonderboom 1 to Alexa devices. Since this pairing happens between the UE Wonderboom 1 and Alexa directly, you need not turn Bluetooth on in the mobile device you’re using to set up this connection.
Connect UE Wonderboom 1 to Alexa: Step by Step
With your UE Wonderboom 1 powered OFF (status lamp is dark), run through this routine to Connect it to your Alexa Echo, Show, Studio, Input, and Dot models. We use an iPad Air tablet to set this up.
1. Find the Alexa app on your Mobile Device
We found the app on the iPad Air as shown in the next shot. In this exercise, the app is in a custom folder we created called Smart Speakers, and pointed at by the arrow.
2. Run the Alexa App
The app displays its Home screen as we see in the next screenshot.
3. Tap the More Item to Continue with Connect UE Wonderboom 1 to Alexa Routine
Find the hamburger item in the lower right corner of the screen. We point at this with the green arrow in the last screenshot.
This brings up the Alexa app’s main menu, as shown in the next screenshot.
4. Tap the Settings Option on the Main Menu
The Settings option is pointed at by the green arrow in the last photo.
This brings up the Settings screen, as shown in the next screenshot.
5. Tap the Device Settings Option
Touching Device Settings brings up the All Devices page, as shown next.
From here, choose which Echo device you wish to pair with your UE Wonderboom 1.
6. Tap the Alexa Device you Wish to Connect
This takes you to the device-specific settings screen for the device you chose.
In this demo, we’re pairing from our Thomas’s 2nd Echo Dot 4 to our UE Wonderboom 1, and so, its device specific settings screen looks as follows.
7. Tap the Connect a Device Item
Find the Connect a Device option pointed at by the green arrow in the last screenshot.
This brings up the Setup screen, as we show next.
At this point, your Alexa device scans for nearby Bluetooth devices that are in pairing mode. Here, we selected an Echo Dot 4 earlier. So, this Alexa will be the one that scans for BT devices.
Note that our Dot found no devices so far. But it will in the next steps, when we turn on the UE Wonderboom 1 and put it in pairing mode.
8. Power Up the UE Wonderboom 1
Bring the UE Wonderboom 1 close to your Alexa device to pair, and power up that unit by pressing and releasing the Power button as we show in the next picture.
9. Place the UE Wonderboom 1 into Pairing / Discovery Mode
Put the UE Wonderboom 1 into pairing mode by pressing and holding in the Pairing button, as illustrated in the next picture, until you hear the pairing sound.
10. Find the UE Wonderboom 1 on the Alexa App SETUP Page
When you start discovery mode on the UE Wonderboom 1, it should then appear in the Alexa app, on the Pair Bluetooth Device… page, as we see next.
Note that if the UE Wonderboom 1 does not show up on this page at this point, then try moving it very close to the Alexa device, closing and restarting the Alexa app, and then repeating steps 3 through 7 along with step 9 above. We usually find that this gets the UE Wonderboom 1 to appear here as it should.
11. Finally, Pair the UE Wonderboom 1 With Alexa
Then pair by tapping its corresponding entry on the Pair Bluetooth Device… screen, we see in the last screenshot above.
Your Alexa device then pairs with the UE Wonderboom 1.
The app then takes you back to the Thomas’s 2nd Echo Dot 4 screen, which looks something like the following.
Note that our UE Wonderboom 1 now shows as Connected. Also, it makes the Speaker Paired sound (the ker-plink sound).
Then the Bluetooth light glows solid white to signal that a successful connection is now in effect.
13. Done with Connect UE Wonderboom 1 to Alexa !
We can now ask Alexa to play music or news, and those programs will come out of the UE Wonderboom 1. Be sure though, to speak to the Echo when making requests, and not the UE Wonderboom 1. Even though the UE Wonderboom 1 is now paired with Alexa, the Echo is still the speaker that hears your voice commands through its internal far field microphones.