Here, we show you how to factory reset the Google Home assistant speaker, the original model. Factory readies your Google Home for sale or gifting to another person by unlink it from your Google account. So to preserve your privacy and Google account, this is something you definitely want to do if someone else will use the speaker from now on.
Once you plug the unit into AC power, wait for it to boot. After that, then move on to the next step.
Once the light ring finishes spinning and flashing in its multi-colored way, and goes completely dark after booting, press and hold the Microphone Mute button. Find this control on the back near the top of the Google Home, for around five seconds.
Moreover, while holding in the mute button, notice that the ring of lights on the top begin glowing orange. In varying brightness intensities and patterns, these give a visual indication of a countdown to reset that is in progress, as we see next.
Then, after about five seconds, the speaker says, “You’re about to completely reset Google Home. To cancel, release the button.” Now is the time to release the Microphone Mute button, if you decide not to erase all speaker settings.
So this continues with the factory default reset. Then after a little while, the orange ring goes out. Next, the top turns white in a spinning pattern. At this time, the speaker restores factory defaults, as shown next.
Additionally, after about ten seconds, the speaker top goes dark. Then a system reboot begins, with a multi-colored pattern lighting up, as shown next.
Then, you hear the startup complete music and then the speaker speaks, “Welcome to Google Home. To start then, download the Google Home app on a phone or tablet.”
Then, the unit goes into setup mode, which means that the unit is now ready to accept setup directives from the Google Home App. The speaker tells us this by lighting the four white blips in the light ring in a dimming and brightening pattern, as we see in the next picture.
Feel free now, to give your Google Home to another without fear that they’ll have access to the settings or other personal information on your Google account. Or, you can then set it up again on your Google account, perhaps with a new WiFi network or device name.
Then, the light ring turns white with the four dots glowing, meaning setup mode. The unit then stays in setup until you run the setup routine. Note that the speaker will not work until set up and linked to a Google account.
Gives the Restart Chromecast Audio Directions. Now you may wish to do this if you…
Gives the Chromecast Audio How to Reboot directions. Now you may wish to reboot Google…
Gives the procedure for Google Chromecast Audio Equalizer Adjust Bass Treble settings. Now this audio…
Since the release of the free Google Home App for iOS devices back in the…
Here, we give the Reset Chromecast Audio procedure. Now resetting restores this streaming receiver to…
In this piece, we show Where Is the Reset Button on Google Chromecast Audio Receiver. …