To link the Pulse 3 JBL speaker with a Bluetooth source device for the first time, or to reset the connection information on that device, you must know how to activate discovery mode on the speaker. You must know this because in this mode, the JBL Pulse 3 calls out its Bluetooth name and current linkage data on the BT airwaves. So in this post, we show you how to make JBL Pulse 3 discoverable, so you can connect it to phones, tablets, computers, and smart speakers, and play music from them, on it.
First, turn on the speaker by pressing its Power button once.
See this button, that we point at with the green arrow in the next picture.
The speaker then comes on, we see next. Further, the pilot lamp on the back panel either blinks or steadily glows white, depending on speaker’s current pairing state.
But whether it’s currently paired or not, you ca follow the next steps to pair the Pulse 3 anew with a Bluetooth source device.
Now, to discover your speaker on your source Bluetooth device, place it into discovery mode. For that, press and release the the Discovery Mode button, as we point it out in the next picture.
When you press this button, the speaker makes a plucking guitar pairing sound. Plus, the lamp in the Pairing button starts quickly blinking white.
Next, while the Status light is blinking, you should be able to see your Pulse 3 speaker on any in-range phone, computer, tablet, or smart speaker, as we see next.
You may experience Wi-Fi connection errors when booting your original Google Home speaker. Or, the…
The JBL Charge 3 features several controls and lights across its top, as well as…
Here we give the hard reset Google Home Mini speaker routine. You might hard reset…
You can hard reset all of the smart speakers in the Google Home family. These…
Covers How to Hard Reset Google Home. Now you can reset this original version of…
Gives the iPod Touch hard reset procedure. Now a hard reset restores all settings to…