Picture of the JBL Clip 2 speaker, top rear view, powered on. showing the status lamp glowing blue highlighted.

JBL Clip 2 Charging Indicator

The JBL Clip 2 has a single LED on its top panel, near the clip carabiner.  This displays battery status. It shows whether it’s draining or charging, or whether it’s critically low or not when discharging.  However, it does not tell you the charging progress. Nor does it show how full the battery is at a given time. Nor does it show how much energy the battery has left when discharging. But it does change color when the battery reaches near-dead. So in this post, we describe how to read the JBL Clip 2 Charging Indicator light.

JBL Clip 2 Charging Indicator: How to Read the Light

1. The Charging Indicator is OFF 

When you power down the Clip 2 with no charger connected, the lamp goes dark. The lamp is also dark when the charger IS present but the battery finished charging.

Picture of top rear of the JBL Clip 2 powered OFF, showing the dark Charging Indicator light. 
Top rear of the JBL Clip 2 powered OFF, showing the dark Charging Indicator light.

2. JBL Clip 2 Charging Indicator Shows Battery Recharging Progress

The status lamp lights up red (no flashing) while the speaker charges, as shown in the next picture.   On this speaker, the glowing light is the only visual indication that charging is underway.  But it does not tell how far along the charging is.

Picture of the red Charging Indicator lamp.
The red Charging Indicator light.

Note that this lamp blinks purple and blue when the battery is very low. This means that you should recharge it soon.  When you apply USB power, this red flashing light turns to a solid red when the speaker is OFF. It turns purple when it’s ON.  Also note that this light never flashes red during correct charging.

3. When the Light Goes Out While Charging, Then Charging is Complete

As speaker charging continues, the light keeps glowing red or purple. Then battery charging completes when the lamp goes out, or turns blue. This light turns off when the speaker is OFF, and turns blue when it is ON.

The next picture shows the speaker charging while ON.  Note the purple light.

Picture of the purple JBL Clip 2 Charging Indicator light.
The purple JBL Clip 2 Charging Indicator lamp.

The battery recharge cycle finishes when the speaker status lamp turns completely off. Even with the AC charger still present, the lamp does not glow when battery is full. Not unless the speaker is running.

If the speaker is ON when charging finishes, the lamp turns from purple to blue.

4. The JBL Clip 2 Charging Indicator Does Not Show Charge Remaining Until Battery Goes Very Low

When you disconnect from the charger, what was the Charging Indicator becomes the battery charge left indicator.  Well sort of.  If it glows blue, then the battery has some amount of play time left, although you cannot tell how much.

But the only indication this light gives about battery status is when the battery hits critically low levels.  Then, it starts flashing purple and blue.

Other Posts About the JBL Clip 2

    1. JBL Clip 2 Extra Bass Mode
    2. Factory Reset Explained
    3. Charging Instructions
    4. Technical Specs
    5. How to Solve the Not Charging Problem

References

    1. JBL Clip 2 Official Product Page
    2. Where to Buy the JBL Clip 2