Bluetooth Speakers

JBL Xtreme Bluetooth Pairing Instructions

This post gives JBL Xtreme speaker Bluetooth pairing instructions.  It shows pairing with iOS tablets and phone devices. But similar procedures work on Android devices also.  In short, with your speaker shut off (Power button dark), run through this routine to pair your Xtreme to a Bluetooth source device. We show this on an iPad Air tablet here.  However, pairing is nearly the same for all the other BT devices, although the screen arrangements are a bit different depending on the source unit you’re pairing.

JBL Xtreme Bluetooth Pairing Instructions

1. Pull Up the Home Screen on your Source Bluetooth Device

Press the Home button to reveal the  Home   screen.  See our Home screen as pictured next.

2. Find the  Settings App on your Source Bluetooth Device

We found ours on the second page of the Home screen on our iPad Air tablet.

iPad Home Screen with Settings App Highlighted.

3. Bring up the Settings App to Continue with JBL Xtreme Bluetooth Pairing

Tap the Settings app icon.

The tablet / iPhone then displays the first page of its Settings screen, as shown in the next screenshot

iOS Settings screen on iPad Air, with Bluetooth turned ON screen showing, and the Bluetooth item highlighted.

4. Go to the Bluetooth Settings Page

Tap the Bluetooth item, as pointed at by the dark green arrow in the last screenshot above.

Our Bluetooth Settings screen the appears as follows. Note that our Bluetooth is enabled here. But since JBL Xtreme speaker is currently powered OFF, it does not show in either the My Devices or Other Devices lists yet,  Why?  Because we’ve never paired it with this iPad Air before, and the speaker is not yet broadcasting its connection information. See this, as shown next.

iPad Air tablet showing previously paired Bluetooth devices list. Note that there’s no JBL Xtreme speaker now.

5. Turn On your JBL Xtreme Bluetooth Speaker

Turn on this speaker by quickly pressing its Power button. See this pointed at by the green arrow in the next picture.

The JBL Xtreme speaker powered OFF, showing its dark Power button highlighted.

The speaker then comes on.

But since our iPad does not know about this speaker, the Xtreme will not pair with it by itself. The light that comes to life in the power switch denotes this not-paired state by glowing solid white or blinking blue, as shown next.

The JBL Xtreme Bluetooth speaker powered on and paired, with its blue glowing Power button highlighted.

6. Put your JBL Bluetooth Speaker into Pairing Mode

Now, to see your JBL Xtreme speaker on your iOS phone or tablet, enter the speaker into Bluetooth pairing mode. To do that, press and release the Bluetooth button on the speaker, as highlighted in the next picture.

The JBL Extreme speaker top view, with the Bluetooth button highlighted. Pairing JBL Xtreme with iPhone iPod iPad iOS.

When you press the Pairing button, the speaker makes a repeating single pluck guitar note sound several times. Plus, the Power button changes from a solid white glow to flashing blue. See this in the last picture.

To simplify  the screenshots that follow, we’ve deleted from our iPad some of the Bluetooth devices not needed to illustrate the points in this demo.

7. Find your JBL Xtreme on your iOS iPad, iPod, or iPhone Device to Continue with JBL Xtreme Bluetooth Pairing

See the screen shot next. We found ours, as pointed at by the green arrow, as seen next.

iOS Bluetooth Settings page, showing the JBL Xtreme speaker discovered and highlighted.

8. Pair with your JBL Xtreme Bluetooth Speaker

Tap the listed speaker in the Other Devices section of the Bluetooth devices list, shown above.

Your iOS device then pairs with the Xtreme (appears as “JBL Xtreme” in this demo). The Bluetooth Settings screen then changes to display something like the following.

iOS tablet, displaying its Bluetooth Settings page, showing a JBL Xtreme speaker paired, connected, and circled.

Note that the Xtreme JBL speaker now shows as connected, as shown inside the green oval in the last picture.

9. Done with JBL Xtreme Bluetooth Pairing !

We have now successfully paired our JBL Xtreme Bluetooth speaker with our iPad iOS device.

Other Posts About the JBL Xtreme Bluetooth Speaker

  1. JBL Xtreme Charging Time, How Long to Fully Charge
  2. Xtreme JBL Speaker Factory Reset Instructions
  3. JBL Xtreme Charger Cord Specs
  4. How to Restart JBL Xtreme Bluetooth Speaker
  5. JBL Xtreme Firmware Update Instructions

Related Posts to JBL Xtreme Bluetooth Pairing

  1. JBL Charge 5 Bluetooth Pairing
  2. JBL Charge 3 Bluetooth Pairing Instructions
  3. Google Home Mini Bluetooth Pairing
  4. JBL Charge 4 Bluetooth Pairing Instructions
  5. JBL Flip 5 Bluetooth Pairing Help

References for JBL Xtreme Bluetooth Pairing

  1. JBL Xtreme Splashproof Bluetooth Speaker Official Product Page on JBL.com

Revision History

  • 2021-08-11: Shortened the internal links and tags lists.
  • 2020-07-27: First released.
Tom Hesley

Recent Posts

Review of How to Change WiFi on Sangean WFR 20 Radio

Occasionally you need to switch your internet devices to a different Wi-Fi network.  So in…

8 hours ago

Review of Changing WiFi Network on Sangean WFR 20 Radio

Occasionally you need to switch your internet devices to a different Wi-Fi network.  So in…

8 hours ago

Philips SHS3200 Earhook Headphones Review

We review the Philips SHS3200 Earhook Headphones here. Now this headset more resembles buds than Earhook…

11 hours ago

Philips SHS3200 Earphones Review

We review the Philips SHS3200 Earphones here. Now this headset more resembles buds than Earphones, and…

11 hours ago

Philips SHS3200 Headphones Review

We review the Philips SHS3200 Headphones here. Now this headset more resembles buds than headphones, and…

11 hours ago

Netgear WNCE2001 Reset

You may wish to change the hosting WiFi network to which the Netgear WNCE2001 connects. …

14 hours ago