Here, we give Logitech Wonderboom 1 hard reset directions. These restore the default settings. Factory resetting works as follows.
Wonderboom hard reset wipes any memorized Bluetooth devices from memory. Clearing this data prevents the unit from pairing to any nearby Bluetooth devices afterwards. Plus, you might do this to re gift the the Logitech Wonderboom 1. Or, you just wish to stop its auto pairing with devices you no longer play through lt.
Logitech Wonderboom 1 Hard Reset: Step by Step
1. Turn ON the Logitech Wonderboom 1
Press and release the Power button. The status lamp in that button lights and you hear a power-up sound. We’ve circled the Power button in the next picture.
Then, the status light comes on solid or it blinks, as shown next.
2. Wait for the Power Up Sound
The Logitech Wonderboom 1 makes a unique sounding turn-on noise. The UE is then ready for hard reset when this sound finishes. It may or may not pair with a device. That depends on whether you have any in-range Bluetooth devices that know about this Logitech Wonderboom 1 and that it have previously paired with as well. Whether paired or not, hard reset works the same way, as follows.
3. Be Sure the Logitech Wonderboom 1 is Not Paired
This unit does not reply to reset requests while connected with a source Bluetooth device. So, unpair the Logitech Wonderboom 1 before hard resetting.
4. Press the Power and the Volume DOWN Button Together for Up to Eight Seconds
Find the Power and Volume DOWN buttons. The Power button is on the top, near the front. Volume DOWN is the long vertical line on the front, near the bottom. See these both pointed out by the green arrows in the next picture.
The Logitech Wonderboom 1 then enters hard reset. Then, in a few seconds, the unit powers off when the reset wraps up. The falling electronic kar-plunk sound goes off. Then the status light in the Power button goes dark.
5. Check that your Logitech Wonderboom 1 Did Indeed Hard Reset
Next, power on the unit again, as detailed in step 1 above.
After a hard reset, the speaker comes up in ready-to-pair mode again, with the pairing lamp rapidly flashing white.
6. Done with Logitech Wonderboom 1 Hard Reset !
Reset is done now. So go ahead and let someone else use the speaker. Or pair it once more with your favorite Bluetooth devices.
After a hard reset, the Logitech Wonderboom 1 no longer auto connects with any prior paired Bluetooth devices. Thus, to set up automatic BT pairing, you pair by hand the Logitech Wonderboom 1 with your desired device(s). Then any time that both the unit and device have Bluetooth turned on, pairing again occurs without you having to do anything.
Don’t forget to delete any now-stale connections to the Logitech Wonderboom 1 from your source Bluetooth devices that you set up prior to resetting. These will no longer work. So you’ll want to “forget” them in your source device’s settings pages.