Picture of the Sony SRS XE200 Bluetooth speaker charging.

Sony XE 200 Power Output

The XE 200 Sony Bluetooth speaker is a medium power, tabletop style column unit with enough power output to fill a typical living room with big sounding tunes.

But what does the amount of output power a wireless speaker has, tell us about how good it is?  Firstly, the watt is a measure of how much power the speaker consumes or outputs.  Plus, this metric is a convenient comparison measure. E.g. Generally speaking, speakers with mor audio output power tend to play louder than those with less.  And while they do cost more, have bigger, heavier batteries and chargers, along with larger drivers and magnets, they nonetheless offer greater dynamic range, have a deeper bass response, and the models that do stereo offer typically a bigger soundstage and better imaging to listeners.

Picture of an Echo Dot 4 clock beside the Sony XE 200.
An Echo Dot 4 clock beside the Sony XE 200.

Thus in general, the more powerful the speaker, the better it sounds, even at lower volume. You get improved crispness due to higher accuracy reproduction of the bass, midrange, and treble musical content. More reserve power often means less clipping distortion too. So, the speaker’s max power output is a primary indicator of speaker quality and performance.  And as such, this value is of great interest to audiophiles and novice listeners alike.

In this case, the Sony XE 200, as a common size portable Bluetooth speaker, is a decently loud model for all the bigger it is. Its power output can fill a room with crystal clear music. See below for details on its power output.





Sony XE 200 Power Output: Details

Power figures in this list expressed in watts.

    1. Battery Capacity: 10.7 watt-hours (3.7 volts, 2.9 amp-hours).
    2. AC Charger Power: 7.5 (5 volts at 1.5 amps).
    3. Bluetooth Standby Mode Power: Less than 0.3.
    4. Total Audio Output Power on AC (RMS): 10.
    5. Total Peak Audio Power (both channels): 14.14.
    6. Output Power per Channel (RMS): 5.
    7. Audio Power Output on Battery: Decreases as battery approaches depletion.

Notes on Sony XE 200 Power Output

    1. The system tries to conserve battery power as the battery get close to total depletion.  The XE 200 does this by reducing the audio output power somewhat.
    2. This speaker may not get enough enough power from the AC adapter to keep the battery from discharging when playing at full volume, depending on what you’re listening to.  So it’s possible that even with the unit plugged in, you could still see it shut OFF unexpectedly.  Thus on the (rare) occasions that this occurs, just stop playing the 200 for an hour or two, to let it build up some reserve power while charging. Then, fire it up again for continued party fun.

Related Posts to Sony XE 200 Power Output

    1. Sony XP 700 Power Output
    2. Sony XB43 Power Output Values
    3. Sony XB21 Power Output
    4. Sony XG500 Power Output
    5. Sony XP 500 Power Output Numbers

References

    1. Official Sony XE 200 Support Page
    2. Where to Buy the Sony XE 200

Revision History

    • 2023-04-10: First published.