Amazon Alexa Dot 2nd Gen with adapter and USB cable.
Gives the Amazon Dot 2 Bluetooth speaker reset instructions. So why would you want to ever reset? Because perhaps you cannot discover it on Bluetooth devices when pairing to it. Or perhaps it’s playing in a stuttering, broken-up way. Sometimes the WiFi and Bluetooth info inside the Dot can become corrupt. Then, should that happen, only a factory reset can restore it to correct function.
Indeed, resetting the Amazon Dot 2 often clears Bluetooth and WiFi connection issues. So, to that end, to reset your Dot to factory default condition, run through the following steps. Resetting not only clears WiFi and Bluetooth connection data. But it also unlinks the Dot from its current Amazon Alexa account. So this further assures that it forgets its current WiFi connections.
After the reset, your Dot 2 will not work until someone sets it up again.
Note that factory reset of the Echo Dot 1 and Echo Dot 2 devices is essentially the same procedure; just the location of the reset button on each is different.
Connect the Echo Dot to its USB power adapter. The light ring will illuminate blue for a time, and then go out, indicating that boot up has completed.
See our Where is the Echo Dot Reset Button post, for details on how to find the reset button on Echo Dot devices.
Anyway, the light ring goes dark after a brief pause, until the speaker finishes booting. When it does, press and hold the Mic Mute and Volume Down buttons together for five to ten seconds.
After a several-seconds pause, the light ring goes completely dark for a few seconds, and then turns orange.
You have now put your Echo Dot 2 speaker back to its factory default settings. Then after reset, it enters setup mode.
You may now unplug, pack, and give your Echo Dot to someone else. No need to fear that they’ll have access to the Alexa settings on your personal Amazon account. You have now erased those prior values from your Dot 2.
Or, you can set it up once again on your existing account. Once the light ring turns orange, the unit remains in setup mode until someone executes the published setup procedure. The Echo Dot will not function until properly set up and linked to an Amazon account.
We've brewed several tens of pots of coffee in our Farberware automatic coffee pot. We've…
Why would you need to perform Honeywell RTH8580WF WiFi setup for this common thermostat ? …
Gives a safe routine to defrost a freezer fast with a heat gun. now a…
You can charge the JBL Clip 3 conveniently via the hidden USB charge port. Here,…
The Charge 3 JBL comes with an AC charger adapter, whose specs , type, and…
We review the Panasonic model NN-SN778 here. Now it comes packed with high power output. …