iPad BT Settings page, showing the highlighted -Tom's Charge 4- speaker as discovered.
To pair the Charge 4 BT speaker with a Bluetooth source device for the first time, or to download the connection information for the speaker onto that device, you must know how to start off pairing mode on the speaker. In this mode, the Charge 4 broadcasts its Bluetooth name and current linkage data over the Bluetooth medium. So in this piece, we show you how to put the Charge 4 speaker into this Bluetooth pairing mode. Thus, you can join it to tablets, phones, other speakers, and computers.
Firstly, turn on the unit by pressing its Power button once.
See this button, pointed at by the bright green arrow, in the next picture.
The speaker then comes on, as pictured next.
Secondly, to be able to discover this speaker on your source Bluetooth device, place it into pairing mode. For that, press and release the the Pairing button, as pointed out in the next picture.
Furthermore, when you press this Pairing button, the speaker makes a plucking guitar pairing sound.
Plus, the lamp in that same button starts quickly blinking white, as shown next.
While the Pairing button light is flashing, you should be able to see your Charge 4 on any in-range phone, computer, tablet, or smart speaker, as shown next.
Moreover, the test speaker is named “Tom’s Charge 4” here. But yours will likely appear as “JBL Charge 4” if you have not renamed it.
The JBL Go 2 speaker by Harman Kardon is a low power, hand-held style unit…
Shows how to fix Honeywell wireless thermostat connection failure issues. You might see these on…
Shows how to connect HP DeskJet 3630 series to WiFi. Note that doing this will…
Here, we show how to reset the Wonderboom speaker version 2. which returns it to…
We give here the JBL Clip reset directions, that return it to its default settings…
The JBL Boom Box JBL by Harman Kardon is a moderate to higher power, boom…