Top view of the JBL Charge 5 speaker, showing the -Volume Up- and -Play-Pause- buttons.

JBL Charge 5 Reset Instructions

This JBL Charge 5 Reset Instructions explain how to restore default settings. In short, it goes as follows: First, power on the speaker. Next, press the Reset button combo code (given below).  Wait for the unit to power OFF, and once that occurs, Bluetooth reset is complete. Now for an in-depth look at this process, see below.

JBL Charge 5 Reset Instructions: Step by Step

Moreover, Bluetooth resetting the speaker clears out any earlier paired Bluetooth devices from memory. Plus, it stops the unit from pairing to any nearby Bluetooth devices after reset. Also, do this it to get the Charge 5 ready for sale or re gifting.

1. Turn on the Speaker

Press and release the Power button.  It should instantly light up solid white.

Picture of the top of the JBL Charge 5, showing the -Power- button when the speaker is OFF.
The JBL Charge 5, top view, showing the -Power- button when the speaker is OFF.

Find the Power button, pointed at by the green arrow in the last picture above.

Then, the Power button lights up, as shown next. In our case, since we’ve paired the speaker with Bluetooth devices before this, it does not enter Bluetooth pairing mode. We can tell that because the Bluetooth button remains OFF, rather than blinking white.  Note the dark Bluetooth button, to the right of the glowing Power button in the next picture.

Picture of the -Power- button glowing.
The -Power- button glowing.

2. Wait for the Power ON Sound

The Charge 5 makes a rising electric guitar strum sound when it powers up, and is ready for use.

3. Press the Volume UP and Play-Pause Buttons Together

See the next picture to find the Play-Pause and UP Volume buttons.

Picture of the top view of the JBL Charge 5, showing the -Volume Up- and -Play-Pause- buttons.
Top view of the JBL Charge 5, showing the -Volume Up- and -Play-Pause- buttons.

The Charge 5 soon enters Reset mode. Note that both the Power and Bluetooth buttons and the oval shaped ring that surrounds them.  All of these light up for a brief period during reset.  I.e. The ring and both buttons glow gray-white.

Picture of all lights lit up on the speaker.
All lights lit up on the speaker.

Then after a short pause, the JBL Charge 5 turns off. All lights go off, and it makes the power-down guitar sound.

The next picture shows the speaker, powered down.  All buttons are dark.

Picture of the JBL Charge 5, top front view.
Top front of the JBL Charge 5.

4. Check that your JBL Charge 5 Did Indeed Reset

Next, power on the speaker again, as discussed in the first step above.  In short, press and release the Power button.

Now this time, after reset, our speaker instantly comes up in Bluetooth discovery mode, as shown next. We did not have to press the Bluetooth button first.  Note that the Bluetooth button blinks to let you know that the speaker has entered Bluetooth pairing / discovery mode. When this button blinks or is dark, the speaker is not in a pairing session. Indeed, we expect it not to pair to anything after a reset.

Picture of the -Power- and -Bluetooth- buttons aglow.
The -Power- and -Bluetooth- buttons aglow.

5. Done with JBL Charge 5 Reset Instructions !

These reset instructions are now complete. Thus you may now pack it up for sale, or pair it again with your favorite Bluetooth devices.

Now as noted prior, the speaker afterwards no longer auto pairs with any device. So you need to forget the previously paired Charge 5 in the Bluetooth devices section of your source device.  Then you manually pair the Charge 5 with that device again if you wish. Finally, after that, any time that both speaker and that device are in range, auto pairing happens once more.

Other JBL Charge 5 Posts

    1. JBL Charge 5 Not Charging
    2. What Is Pairing Mode
    3. Connect to JBL Charge 5
    4. Connect JBL Charge 5 to Alexa
    5. The Speaker Controls

References for JBL Charge 5 Reset Instructions

    1. Official JBL Charge 5 Product Page
    2. Where to Buy the JBL Charge 5