Picture of the left front of the Sony SRS X2 speaker.

Sony SRS X2 Reset Instructions

Gives reset directions for your Sony SRS X2 personal speaker to restore it to its default settings. Plus, a reset erases any earlier paired Bluetooth devices from memory. We might want to clear these to prevent this speaker from pairing automatically to any nearby Bluetooth devices. Also, you should reset your X2 to get it ready for sale or re-gifting, or to stop it from pairing with devices you no longer wish it to connect with.

Sony SRS X2 Speaker Reset Directions, Step by Step

1. Turn ON the Speaker

Press and release the Power button for a half-second or so. Find the Power button as shown in the next picture.

Picture of the Power button on the Sony SRS X2 Bluetooth speaker.
The Power button on the Sony SRS X2 Bluetooth speaker.

Find the Power button, as shown in the last picture above.

Then, the status light comes on, as shown next.  This light we find on the bottom edge of the front of the unit.

Picture of the green glowing Power light on the Sony SRS X2 speaker.
The green glowing Power light on the Sony SRS X2 speaker.

The speaker makes a startup chord sound when it powers up, whether it connects to a nearby device or not. But whether it pairs or not, this reset routine works the same way, as follows.

2. Press and Hold the Volume DOWN and Power Buttons

Both of these buttons we find on the top of the speaker, right of center, as called out in the next picture. Both buttons are in the back row.  The Volume Down button is in the leftmost position in this row, while the Power button is in the rightmost position.

Picture of the Volume Down and Power buttons on the speaker.
The Volume Down and Power buttons.

Since one of these buttons is for power, you need to first press the Volume Down button by itself,  Then, after a half-second, while holding that one in, press and hold the Power button.  Doing it this way prevents accidently powering down the speaker before it has a chance to reset.

Then, hold both buttons in until all lamps go out, and the speaker shuts down.  This takes around five seconds while the speaker resets.

Next, the speaker powers OFF, and the Power and Pairing lamps go dark, as shown next. Note that on this speaker, there is no power-down sound when factory reset finishes.

Picture of the top of the Sony SRS X2 speaker, showing all lamps dark.
Top of the Sony SRS X2 speaker, showing all lamps dark.

You may release the buttons when all the lights go dark.

3. Check that your Sony SRS X2 Speaker Did Indeed Reset

Next, power on the X2 once more, as described in step 1 above.

Note that after a reset, this speaker comes up in pairing mode. The Pairing lamp blinks in fast white pulses to tell you this.  This is a signal for you to look for this speaker on a nearby BT device, and pair to it if you so desire.

4. Done with Sony SRS X2 Reset !

The reset is now finished. So you may now sell or gift the unit, or pair it again with your favorite Bluetooth devices.

After a factory reset, the speaker no longer automatically connects with any previously paired Bluetooth device. Thus, to restore this auto syncing, you manually pair the X2 with a device. Then after that, any time that both speaker and that device have Bluetooth turned on, and they’re near to each other, pairing would automatically take place once more.

Other Posts About the Sony SRS X2

    1. Sony SRS X2 Charging Instructions
    2. Telliig that the Sony SRS X2 Speaker is Charging
    3. How to Connect to Sony SRS X2 Speaker
    4. How to Factory Reset Sony SRS X2 Speaker
    5. Sony SRS X2 Speaker Buttons Explained

Related Posts to Sony SRS X2 Reset

    1. JBL Flip 2 Reset Instructions
    2. Ultimate Ears Wonderboom Reset Instructions
    3. Resetting Google Home Mini Speaker Instructions
    4. JBL Flip 5 Reset Instructions to Solve Many Problems
    5. Belkin Wireless Extender Reset Instructions

References for Sony SRS X2 Reset

    1. Sony SRS X2 Speaker Support Page at Sony.com

Revision History

    • 2022-10-12: First published.