This post gives Bluetooth pairing directions for the Sony SRS XB01 personal speaker. Learn how to pair it with common portable devices like the iPhone, iPod Touch, and the iPad line of Apple phones, media players, and tablets. A similar BT pairing procedure also works with Android devices as well.
Sony SRS XB01 Bluetooth Pairing, Step by Step
With your SRS XB01 switched OFF (the status lamp on the front is dark), run through these directions to link it to your source BT mobile device. We’re using an iPad Air tablet in this demo.
1. Go to the Home Screen on that Source Device
Firstly, press the Home button to reveal the smart device’s Home screen.
2. Find the Settings App
We found ours on the second page of the Home screen, as shown next.
3. Bring up the Settings App
Thirdly, touch the Settings app icon.
The our test tablet then shows the first page of its settings, as shown in the next step.
4. Go to the Bluetooth Settings Page to Continue with Sony SRS XB01 Bluetooth Pairing
Our Bluetooth Settings screen displays as follows. Note that our Bluetooth is running here. But since our XB 01 is currently shut OFF (is not in Bluetooth pairing mode), it does not appear in the BT devices list. Also, we don’t see it since we’ve never paired this speaker with this mobile device before.
5. Turn On your SRS XB01
Turn on the XB01 by quickly pressing and releasing its Power-Pairing button. See this, pointed at by the yellow arrow in the next picture.
The speaker then powers up, and its status lamp glows or flashes blue, as we see in the next picture.
But since the demo iPad does not know about this speaker, the XB01 will not pair with it automatically.
6. Put the SRS XB01 into Discovery Mode
Now, to see the Sony XB01 on your device, place it into pairing / discovery mode. To do that, press and hold in the Power-Pairing button, and release when the speaker plays two high beep tones. This usually takes one to two seconds to enter BT discovery mode. Find the Power-Pairing button as seen above.
Also, when you hear the beeps, the Bluetooth Status lamp begins flashing in quick blue pulses.
7. Find the Speaker on your Mobile Device to Continue with Sony SRS XB01 Bluetooth Pairing
See the screen shot next. We found our XB01, as we point at with the yellow arrow.
8. Pair with your XB01
Tap the listed speaker in the discovered devices list.
Your mobile device then pairs with the speaker.
E.g. The the mobile device’s Bluetooth Settings screen might then change to look something like the following. Note the now-connected SRS XB01 entry, as pointed at by the green arrows in the next screenshot.
9. Done with Sony SRS XB01 Bluetooth Pairing !
At last, we have now successfully paired the XB01 with a common mobile tablet device.
Related Posts to Sony SRS XB01 Bluetooth Pairing
Other Posts About the Sony SRS XB01
References for Sony SRS XB01 Bluetooth Pairing Instructions
Revision History
-
- 2022-08-10: First published.