Sony SRS XB01 Pairing Instructions

The glowing Sony SRS XB01 speaker Status light.

This post gives pairing instructions for the Sony SRS XB01 mini speaker with common portable devices. E.g. These include the iPhone, iPod Touch, and the iPad line of Apple phones, media players, and tablets.

Sony SRS XB01 Pairing Instructions, Step by Step

With your SRS XB01 powered OFF (power button is dark), run through these directions to pair it to your source BT mobile device. We’re using an iPad Air tablet in this demo.

1. Go to the Home Screen on your Source Device

Firstly, press the Home button to reveal the smart device’s Home screen.

2. Find the Settings App

We found ours on the second page of the Home screen, as shown next.

iOS Home Screen with Settings App Highlighted

3. Bring up the Settings App

Thirdly, touch the Settings app icon.

The our test tablet then shows the first page of its settings, as shown in the next step.

4. Go to the Bluetooth Settings Page to Continue with Pairing the Sony SRS XB01

Our Bluetooth Settings screen displays as follows. Note that our Bluetooth is running here. But since our XB01 is currently shut OFF (is not in Bluetooth pairing mode), it does not appear in the BT devices list. Also, we don’t see it since we’ve never paired this speaker with this mobile device before.

iPadOS -Bluetooth Settings- page showing nothing discovered

5. Turn On your SRS XB01

Turn on the XB01 by quickly pressing and releasing its Power-Pairing button. See this, pointed at by the yellow arrow in the next picture.

The Sony SRS XB01 -Power- button.

The speaker then powers up, and its status lamp glows or blinks blue, as we see in the next picture.

The glowing -Status- light.

But since the demo iPad does not know about this speaker, the XB01 will not pair with it automatically.

6. Put the XB01 into Discovery Mode

Now, to see the SRS XB01 on your device, place it into Bluetooth pairing / discovery mode. To do that, press and hold in the Power-Pairing button, and release when the speaker plays two high beep tones. This usually takes one to two seconds to enter BT discovery mode. Find the Power-Pairing button as seen above.

Also, when you hear the beeps, the Bluetooth Status lamp begins flashing in rapid blue pulses.

7. Find the Speaker on your Mobile Device to Continue with Sony SRS XB01 Pairing

See the screen shot next. We found our XB01, as pointed at by the yellow arrow.

iPadOS -Bluetooth Settings- page showing a Sony SRS XB01 as Discovered but not Connected.

8. Pair with your XB01

Tap the listed speaker in the discovered devices list.

Your mobile device then pairs with the SRS XB01.

E.g. The the mobile device’s Bluetooth Settings screen might then change to look something like the following. Note the now-connected SRS XB01 entry, as pointed at by the green arrows in the next screenshot.

iPadOS -Bluetooth Settings- page, showing the Sony SRS XB01 speaker as Connected.