This piece gives Sony XB 01 charging instructions. Recharge this speaker easily through the micro USB DC power input port, behind the water resistant door on the top right edge of the unit, shown in the pictures below. Note that you can still play your XB 01 while recharging it, without increasing the replenish time too much, especially if you are using a higher-current USB charger.
Sony XB 01 Charging Instructions Summary
First, the unit comes with a suitable USB-A to micro USB charger cord. But you must provide a strong enough AC or car supply with a USB-A female connector, to plug that lead into. This particular speaker requires about 2.5 watts (5 volts at 500 milliamps) for the shortest charge time of three (3) hours. Note that using a charger that offers more current than this will not appreciably decrease the charging time of this speaker.
Now then, once you choose the charger you will use, plug it into a “live” AC outlet.
Then after three hours, the XB 01 finishes charging. So it’s ready to play once more for up to six (6) hours before needing another recharge.
Sony XB 01 Charging Instructions, Step by Step
1. Choose an Adequate Size AC or Car Adapter
As mentioned earlier, the power adapter you use should provide 5 volts and at least 0.5 amps (2.5 watts). So here, we use the Key Power model HDD15-3-PD USB power delivery system along with a thick-enough micro USB supply cable.
2. Open the Port Cap Door
Use a fingernail, dime, penny, or small screwdriver to pry open the waterproof seal port cover on the XB 01 back.
See the opened power port compartment in the next picture. Take care not to scratch the delicate seal around the inside edge of this cap, lest it no longer seal properly.
Prying open this door exposes the micro USB charging port inside, as shown in the last picture, pointed at by the bright green arrow.
3. Power OFF the Speaker to Continue with Sony XB 01 Charging Instructions
Note that the XB 01 still charges when powered ON. But depending on how much extra charging juice your supply delivers, the speaker might recharge a bit faster when it’s not running. It will definitely charge more rapidly when you’re not playing it at louder volumes.
4. Plug the USB Cord into the XB 01
Then, plug the matching end of your charging cable into the DC input micro USB port on the speaker, as we see in the next photo.
5. Plug the Other End of the USB Cable into your Charger Adapter
If the supply you use has a removable wire, then be sure to connect the matching end of the USB power cable to the AC or car adapter you have.
6. Plug the USB Adapter into a Working Wall Receptacle to Continue with Sony XB 01 Charging
Now that we connected the XB 01 and our adapter, we then plug the mains end of the supply box into a working AC outlet, as shown next. We connected ours to a GE surge protecting power strip.
The CHARGE lamp then lights up solid orange on the speaker, as we see next.
7. Let the XB 01 Continue Charging Until the CHARGE Light Goes Dark
Full battery recharging finishes when the CHARGE lamp turns off, as shown next.
8. Unplug the Micro USB Charging Cable from the Speaker
9. Fully Close the Port Door / Cap
Note that unless you seat the port cap fully, water may run into its ports. And, since water and electronic components do not work well together, getting those connections wet might degrade them. So be sure to press this door closed with enough force to fully seat it, for maximum moisture protection.
10. Done with Sony XB 01 Charging !
We have now fully charged our XB 01 speaker.
Finally, repeat this recharging every (up to) twelve hours of play, to keep the battery in top condition for at least several years to come.
Other Sony XB 01 Posts
Related Posts to Sony XB 01 Charging Instructions
References
Revision History
-
- 2023-04-12: First published.