Why would you need to know how to find Honeywell thermostat MAC Id? It helps in troubleshooting internet problems between your smart t-stat and the Honeywell Total Comfort Connect website. Now all WiFi thermostats have a MAC id. Why? Because without this, you would not be able to control the thermostat outside your home.
Thus, you can find the t-stat’s MAC ID and MAC CRC values as well, using this method. How so? We find these also on the same screen as the IP address. And, you get to that screen the same way, whether searching for IP address, MAC, or CRC values. You also need the MAC CRC and MAC Id numbers when registering your Honeywell WiFi thermostat. Note that you cannot set your thermostat remotely if you do not register it.
How to Find Honeywell Thermostat MAC Id: Step by Step
1. Go to the Thermostat’s Home screen
These thermostat sit at the Home screen by default, and will return there from any other screen after several minutes.
The Home screen we see on our Honeywell RTH9580WF looks as follows.
![Picture of a common Honeywell smart WiFi thermostat, showing its -Home- screen, with the -Menu-button highlighted.](https://i0.wp.com/tomstek.us/wp-content/uploads/2018/05/HoneywellRTH9580WFHomeMenuHighlighted_001.jpg?resize=300%2C224&ssl=1)
2. Tap the Menu Item
Tapping the menu option then brings up the main menu screen.
![Picture of the Honeywell RTH9580WF WiFi Smart Thermostat menu, with the WiFi Setup button circled.](https://i0.wp.com/tomstek.us/wp-content/uploads/2016/02/HoneywellRTH9580WFWiFiSmartThermostatMenuWiFiSetup_001.jpg?resize=300%2C224&ssl=1)
3. Tap the Wi-Fi Setup Menu Item to Continue with How to Find Honeywell Thermostat MAC Id
Use the scroll arrow keys (right side of the screen) to move down to the Wi-Fi Setup option.
We found ours though, and tapped it. This brought up the following screen.
![Picture of the Honeywell RTH9580WF Wi-Fi thermostat, displaying its -Wi-Fi Setup- screen, with the thermostat's MAC Id and CRC number covered.](https://i0.wp.com/tomstek.us/wp-content/uploads/2017/03/HoneywellRTH9580WFWiFiThermostatWiFiSetupMACCRCCovered_001.jpg?resize=300%2C177&ssl=1)
In this example, looking at the Wi-Fi Setup screen above, we see that our thermostat internet protocol address is 192.168.0.15. This screen also displays the Thermostat MAC and Thermostat CRC values. Note that these are unique to each thermostat. So when registering, you should only use the numbers found on the thermostat that you’re setting up.
4. Done with How to Find Honeywell Thermostat MAC Id !
Finally, this completes how to find the MAC Id value on a typical Honeywell thermostat. We hope this routine helps you debug any problems with your Honeywell smart WiFi thermostat.