Picture of the Sony SRS XB40 Bluetooth speaker charging.

How to Charge Sony XB40

This piece covers how to charge the Sony XB40. Do this easily through the DC power in barrel style port, shown in the pictures below. Note that you can still play your XB40 as it recharges, without raising the charging time by very much.

First, pick a powerful enough adapter, as no charger comes with this Sony Bluetooth speaker. Then, plug the charger into the speaker as well as a working wall outlet. Finally, after four hours or so, your XB 40 finishes recharging.  So it’s ready to play once more for up to twenty-four (24) hours before needing another charge-up.

How to Charge Sony XB40, Step by Step

1. Choose Correct Size AC or Car Adapter

The charger you use should provide 9.5 volts at 2.5 amps (23.75 watts) for fastest results.

2. Power OFF the Unit to Continue with How to Charge Sony XB40

Note that the SRSXB40 still charges when running.  But depending on how much above-and-beyond recharging headroom that your charger supplies, the speaker might charge a trifle faster when turned OFF.





3. Plug the Power Cord into the Speaker

First, open the water resistant port door.

Picture of the back of the Sony XB40.
The rear view of the Sony XB40.

This exposes the barrel type DC input input port as we see next.

Picture of the DC power input port on the Sony XB40.
The DC power input port on the Sony XB40.

Then, plug the barrel end of the cable into the port on the back of the speaker, as we see in the next shot.

Picture of a power cord correctly inserted into the speaker.
A power cord correctly inserted into the speaker.

4. Plug the Adapter into a Working Wall Receptacle

Now that we connected the XB 40 and our adapter, we then plug the mains end of the adapter into a working AC outlet, as we show next. We connected ours to a power strip surge protector.

Picture of the speaker charging.
The speaker charging.

The CHARGE lamp lights up solid orange on the speaker. And while no battery status gauge shows percentage of charge, this lighted lamp means that charging is occurring. We show this light next.

Picture of the CHARGE indicator lamp glowing orange on the Sony XB40.
The CHARGE indicator lamp glowing orange on the Sony XB40.

6. Let the XB40 Charge Until the Orange CHARGE Light Goes Out

Full battery charging is complete when the solid glowing CHARGE lamp on the top panel, behind the Power button turns off, as shown next.

Picture of the dark CHARGE indicator light on the Sony XB40.
The dark CHARGE indicator lamp on the Sony XB40.

7. Unplug the Cable from the Speaker

Also, close the port cap to maintain water resistance.

8. Done with How to Charge Sony XB40 !

We have now fully charged this speaker.

Finally, repeat this recharging every twenty-four (24) hours of play, or any time the 40 goes dead, to keep the battery in top condition for years to come.

Other Sony XB40 Posts

    1. Sony XB40 Specs Watts
    2. Sony XB40 Pairing Two Speakers
    3. How to Use the ADD Button
    4. Charge Time
    5. The Blinking Orange Light Problem Solved

References

    1. Official Sony XB40 Support Page
    2. Where to Buy the Sony XB40