Right front view of Sony SRS XB32 speaker.

How to Hard Reset Sony SRS XB32

Show you how to hard reset your Sony SRS XB32 Extra Bass speaker to its default settings.  Resetting restores the 32 to default state. Plus, hard resetting erases any earlier paired Bluetooth devices from its memory. This stops the speaker from pairing to any nearby Bluetooth devices. Furthermore, you might hard reset to get it ready for sale or re-gifting, or to stop it from pairing wirelessly with devices you no longer wish it to connect with.

How to Hard Reset Sony SRS XB32, Step by Step

1. Turn the Speaker ON

Press and release the Power button for a half-second or so. Find the Power button as shown in the next picture.

Picture of the -Power- button. How to Hard Reset Sony SRS XB32.
Sony SRS XB32 speaker -Power- button.

Find the Power button, as shown in the last picture above.

Then, the status light comes on, as shown next.

Picture of the glowing -Power- lamp on the speaker.
The -Power- light glowing

The speaker may make a two-tone sound when it powers up, to announce that it has paired, should it sync to a nearby device. Or it may play no sound at all if it does not.  But whether the unit pairs or not though, this hard reset routine works the same way, as follows.

2. Press and Hold the Power and Volume DOWN Buttons Together

Find these buttons as shown next.  They are both on the top button panel, as we point out in the next picture.

Picture of the Sony SRS XB32 speaker, showing the Volume DOWN and Power buttons.
The Sony SRS XB32 speaker, showing the Volume DOWN and Power buttons.

The XB32 then enters the hard reset process.

Then after around five seconds, the speaker powers OFF, and the status lamp goes dark, as shown next. So release the buttons at this point. Note that on the SRS XB32, there is no power-OFF sound.

Picture of the dark -Power- lamp.
The dark -Power- lamp.

3. Check that your Sony SRS XB32 Did Indeed Hard Reset

Next, power on the unit again, as detailed in step 1 above.

Note that after hard reset, the XB32 comes up in discovery mode. The Pairing Mode lamp quickly flashes blue to let you know this. It should not connect with any device fresh after a hard reset.

E.g. See this in the next picture.

Picture of the Bluetooth Status lamp blinking..
The Bluetooth Status light flashing.

This is a signal that you may then look for this speaker on a nearby BT device, and pair to it if you so desire.

4. Done with How to Hard Reset Sony SRS XB32 !

The hard reset is now finished. So you may now sell or gift the speaker, or pair it again with your favorite Bluetooth devices.

After a hard reset, the XB32 no longer automatically links with any Bluetooth device. So to restore auto joining, you manually pair it with a device. Then after that, any time that both speaker and that device have Bluetooth turned on, and are in range, pairing would automatically take place once more.

Related Posts to How to Hard Reset Sony SRS XB32

    1. How to Hard Reset Sony SRS XB01 Wireless Speaker
    2. Sony SRS X11 Bluetooth Cube How to Hard Reset
    3. How to Hard Reset Sony SRS XB23 Wireless Speaker
    4. Sony SRS XB41 Speaker How to Hard Reset
    5. How to Hard Reset Sony SRS XB33 Bluetooth Speaker

Other Posts About the Sony SRS XB32 

    1. How to Make Sony SRS XB32 Discoverable
    2. Sony SRS XB32 Put in Pairing Mode
    3. How to Pair Sony SRS XB32 Bluetooth Speaker
    4. Sony SRS XB32, How to Turn Off
    5. How to Turn Off Lights on the XB32

References for How to Reset the Sony SRS XB32

    1. Sony SRS XB32 Official Product Page at Sony.com

Revision History

    • 2021-09-28: First published.