Ultimate Ears Wonderboom BT speaker, powered ON, showing the top view, with the glowing -Power- button circled.
To pair your Ultimate Ears Wonderboom speaker with a Bluetooth source device for the first time, or to refresh old connection info in that device, you have to know how to start up pairing mode on the speaker. When in this mode, the speaker broadcasts its name and currently valid connection information over the Bluetooth airways. Then, BT devices nearby can “hear” these broadcasts and use the information sent out to connect to them. So in this post, we show you how to put the Ultimate Ears Wonderboom speaker into pairing mode, so you can link it with phones, tablets, computers, and smart speakers.
Firstly, turn on the speaker by rapidly pressing its Power button.
See this button, circled in green, in the next picture.
The speaker then comes on.
Secondly, to be able to discover your speaker on your source Bluetooth device, first place it into pairing mode. To do that, press and hold the the Pairing button, as circled in the next picture.
When you press this Pairing button, the speaker makes an offbeat but cool pairing sound. Plus, a lamp in this button starts rapidly flashing white. See this in the last picture above.
Thirdly, while the Pairing button is blinking, you should be able to see your speaker on any in-range phone, computer, tablet, or smart speaker, that is within several feet of it, as shown next.
You may experience Wi-Fi connection errors when booting your original Google Home speaker. Or, the…
The JBL Charge 3 features several controls and lights across its top, as well as…
Here we give the hard reset Google Home Mini speaker routine. You might hard reset…
You can hard reset all of the smart speakers in the Google Home family. These…
Covers How to Hard Reset Google Home. Now you can reset this original version of…
Gives the iPod Touch hard reset procedure. Now a hard reset restores all settings to…