Shows how to restart JBL Charge 5 speaker. First, turn the speaker on. Next, wait for it to finish booting. Then press and release the Volume UP and Play-Pause buttons at the same time. Then wait for the unit to shut down. At this point, restarting is complete. So the next time you turn it on, it comes up in pairing mode, and is ready to connect. We detail this routine next.
How to Restart JBL Charge 5 Speaker: Step by Step Details
Restarting puts the speaker back into its default factory state. Plus, it purges any earlier paired Bluetooth devices from memory. So, this stops the Charge 5 from connecting to any devices after restart. Also, you should restart to get the Charge 5 ready for sale or re gifting.
1. Turn on the JBL Charge 5 Speaker
Press and release the Power button. It should light up solid white right away.
Find the Power button, pointed at by the green arrow in the last picture above.
Then, the Power button comes on, as shown next. Here, since we’ve paired the 5 with Bluetooth devices before this, it does not enter Bluetooth discovery mode by itself. We know that because the Bluetooth button remains OFF, rather than blinking white. Note the dark Bluetooth button, to the right of the glowing Power button in the next picture.
2. Wait for the Power Up Sound
The speaker makes a rising electric guitar strum sound when it powers up. Then it is ready for restart once this sound finishes.
3. Press the Volume UP and Play-Pause Buttons Together
See the next picture to find the UP Volume and Play-Pause buttons.
The speaker then enters restart, as shown in the next picture. Note that both the Power and Bluetooth buttons and the egg shaped ring that surrounds them. All of these light up for a couple seconds during restart. I.e. The ring and both buttons glow gray-white.
Then after a short pause, the JBL Charge 5 speaker turns off. All lights go off, and it makes the power-down guitar sound.
The next picture shows the speaker powered down. All buttons are dark.
4. Check that your JBL Charge 5 Speaker Did Restart
Next, power on the 5 again, as we did in step 1 above. In short, press and release the Power button.
Now this time, after restart, our speaker instantly comes up in Bluetooth discovery mode, as shown next. We did not need to press the Bluetooth button first. Note that the Bluetooth button blinks to let you know that the 5 has entered Bluetooth discovery mode. When this button blinks or is dark, the speaker is not currently in a pairing session. Indeed, we expect it not to pair to anything after a restart.
5. Done with How to Restart JBL Charge 5 Speaker !
The JBL Charge 5 speaker restart is now complete. Thus you may now pack it up for sale, or pair it again with your favorite Bluetooth devices.
Now the Charge 5 will no longer automatically pair with any device after restart. So you need to forget the previously paired JBL Charge 5 Speaker in your source device settings. Once you do that, then you may manually pair the 5 with that device again. Then, any time that both speaker and that device are in range, auto pairing happens once more.