Sony XB 41 Factory Reset

We give here factory reset directions for your Sony XB 41 Extra Bass wireless speaker to restore its default factory settings. Factory resetting returns the XB 41 to default fresh-out-of-box state. Plus, it erases any earlier paired Bluetooth device linkage from memory. Clearing this stops this speaker from pairing to any nearby Bluetooth devices. Also, you might factory reset to get it ready for sale or re-gifting, or to stop it from pairing wirelessly with devices you no longer wish it to connect with.

Sony XB 41 Factory Reset, Step by Step

1. Turn the XB 41 ON

Press and release the Power button for a half-second or so. E.g. Find the Power button as shown in the next picture. It’s the rightmost button in the top buttons panel.

Picture of the Sony XB 41 -Power- button. Sony XB 41 Factory Reset. — The Sony XB 41 -Power- button.

Then, the status light comes on, as shown next.

Picture of the white glowing -Power- lamp. — The -Power- light glowing white.

The speaker may make a ping-pang tone sound when it powers up to signify that is has paired with a device. Or it may make no sound whatsoever if it does not connect. But whether the unit connects or not though, the factory reset routine is the same, as follows.

2. Press and Hold the Power and Volume DOWN Buttons Together

Find these buttons as shown next. They are both on the top button panel, as we point out in the next picture.

Picture of the -Power- and -Volume DOWN- buttons. Sony XB 41 Factory Reset. — The -Power- and -Volume DOWN- buttons.

The XB 41 then enters factory reset mode.

Then after a very small pause, the speaker powers OFF, and the status lamp goes dark, as shown next. Note that on the XB 41, there is no power-down sound.

Picture of the dark -Power- light on the XB 41. — The XB 41 with dark -Power- lamp.

3. Check that your Sony XB 41 Did Indeed Factory Reset

Next, power on the unit again, as detailed in step 1 above.

Note that after factory reset, the XB 41 comes up in discovery mode. The Pairing Mode lamp quickly flashes blue to let you know this. E.g. See this in the next picture.

The glowing -Bluetooth Status- light. — The -Bluetooth Status- lamp glowing.

This is a signal that you may then look for this speaker on a nearby BT device, and pair to it if you so desire.

4. Done with Sony XB 41 Factory Reset !

The factory reset is now done. So you may now sell or gift the speaker safely, or pair it again with your favorite Bluetooth devices.

After a factory reset, the XB 41 no longer connects automatically with any Bluetooth device. So to get auto joining going again, you manually pair it with a device. Then after that, any time that both speaker and that device have Bluetooth turned on, and they’re near to each other, pairing would automatically take place once more.

References

1. Official Sony XB 41 Support Page
2. Where to Buy the Sony XB 41

Revision History

- 2023-04-09: First published.