The front right view of the Sony SRS XB21 speaker.

Sony XB21 Factory Reset Instructions

We give Sony XB21 factory reset instructions to return this Extra Bass wireless speaker to its factory default settings.  Factory resetting restores this version of the XB series speaker to fresh-out-of-the-box state. Plus, doing this erases any earlier paired Bluetooth devices from memory. Then this clearing stops the XB21 from pairing to any nearby Bluetooth devices. Further, you might factory reset to get it ready for sale or re-gifting, or to stop it from pairing wirelessly with devices you no longer wish it to connect with.

Sony XB21 Factory Reset, Step by Step Instructions

1. Turn the Speaker ON

Press and release the Power button for a half-second or so. Find the Power button as shown in the next picture.

The -Power- button on the Sony XB21. Sony XB21 Factory Reset.
Sony XB21 -Power- button.

Then, the status light comes on, as shown next.

The glowing -Power- light on the speaker.
The speaker’s -Power- lamp glowing.

The speaker may make a ding-dong tone sound when it powers up, should it link to a nearby device. Or it may make no noise if it does not do so.  But whether the unit pairs or not, this factory reset routine works the same way, as follows.

2. Press and Hold the Power and Volume DOWN Buttons Together

Find these buttons as shown next.  They are both on the top button panel, as we point out in the next picture.

Picture of the -Power- and -Volume DOWN- buttons.
The -Power- and -Volume Down- buttons.

The XB21 then enters factory reset mode.

Then after a mini pause, the unit powers OFF, and the Power lamp goes dark, as shown next. Note that on the SRS XB21, there is no shutdown sound.

The dark -Power- lamp on the Sony XB21.
Sony XB21 -Power- lamp dark.

3. Check that your Sony XB21 Did Indeed Factory Reset

Next, switch ON the unit again, as detailed in step 1 above.

Note that after factory reset, the XB21 comes up in discovery mode. The Pairing Mode lamp flashes rapidly to let you know this.

The glowing -Bluetooth Status- light.
The -Bluetooth Status- lamp glowing.

This is a signal that you may then look for this speaker on a nearby BT device, and pair to it if you so desire.

4. Done with Sony XB21 Factory Reset !

The factory reset is now finished. So you may now sell or gift it, or pair it again with your favorite Bluetooth devices.

After a factory reset, the XB21 no longer automatically syncs with any previously paired Bluetooth device. Thus, to restore auto linking, you manually pair it with a device. Then after that, any time that both speaker and that device have Bluetooth activated, and they’re near to each other, pairing would automatically take place once more.

Related Posts to Sony XB21 Factory Reset

    1. Sony SRS XB22 Factory Reset Instructions
    2. Sony SRS X2 Factory Reset Instructions
    3. Sony XB13 Factory Reset Instructions
    4. Sony Bluetooth Speaker Factory Reset Instructions
    5. Sony X2 Factory Reset Instructions

Other Sony XB21 Posts

    1. Sony XB21 Charge Time
    2. Sony XB21 Watts Output, Input, Battery, Adapter
    3. How to Charge Sony XB21
    4. How to Make Sony XB21 Discoverable
    5. Sony XB21 Charger Type


    1. Official Sony XB21 Support Page
    2. Where to Buy the Sony XB21

Revision History

    • 2023-03-17: First published.