Picture of the Sony SRS XB13 -Play-Pause- and -Volume UP- buttons.

How to Hard Reset Sony XB 13

We explain here how to hard reset the Sony XB 13 to return it back to default factory settings. So hard resetting recreates the factory default state on the XB 13. Plus, it erases any previously connected Bluetooth devices from its memory. Erasing these stops this unit from joining to any close by BT devices. Also, you should hard reset to get this speaker ready for sale or re-gifting, or to stop the auto connecting with devices you no longer wish it to join with.

How to Hard Reset Sony XB 13, Step by Step

1. Power UP the XB 13

Press the Power button for a half-second or so and then release it.

E.g. Find the Power button as we show in the next picture.

Picture of the Sony XB 13 -Power- button. How to Hard Reset Sony XB 13.
The -Power- Button on the Sony XB 13.

Then, the status light comes on, as shown next.

Picture of the -Power- lamp glowing.
The -Power- lamp glowing.

The speaker may make a high-low tone sound when it powers up, should it auto link to a nearby device. Or it may make nary a sound if it does not.  Yet whether it joins or not, this hard reset routine works the same, as follows.

2. Press and Hold the Play / Pause and Volume UP Buttons at the Same Time

Find these buttons as we show next.  Both are near the bottom of the speaker, as called out in the next picture.

Picture of the Sony XB 13 -Play-Pause- and -Volume UP- buttons.
The Sony XB 13 -Play-Pause- and -Volume UP- buttons.

The XB 13 then enters hard reset mode.

After a little pause, the speaker powers OFF, and the status lamp goes dark, as shown next. Note that on the XB 13, there is no power-down tone.

Picture of the -Power- lamp shown as OFF. Sony XB 13 Factory Reset.
The -Power- lamp shown as OFF.

3. Check that the Hard Reset Did Indeed Happen on your Sony XB 13

Next, power on the mini speaker again, as we detail in step 1.

Note that after a hard reset, the XB 13 comes up in discovery / pairing mode. The Power lamp blinks blue rapidly to signal this.  This is a prompt that you may then look for this speaker on a nearby BT device, and pair to it if you so desire.

4. Done with How to Hard Reset Sony XB 13 !

Hard reset is now done. So you may now gift or sell the speaker, or connect it again with your favorite Bluetooth devices.

After a hard reset, the XB 13 no longer auto pairs with any prior linked Bluetooth device. Thus, to restore automatic pairing, you first manually pair it with a device. Then after that, any time that both speaker and that device have Bluetooth turned on, and they’re near to each other, pairing automatically takes place once more.

Related Posts to How to Hard Reset Sony XB 13

    1. How to Hard Reset JBL Clip 4
    2. How to Hard Reset Sony SRS XE300
    3. How to Hard Reset Sony XE 200
    4. How to Hard Reset Sony XB43
    5. How to Hard Reset JBL Flip 5

Other Sony XB 13 Posts

    1. Sony XB 13 Blinking Orange Light
    2. Sony XB 13 Battery Life
    3. How to Turn Off Sony XB 13
    4. Sony XB 13 Power Output Ratings
    5. Sony XB 13 Charging Instructions

References

    1. Official Sony XB 13 Support Page
    2. Where to Buy the Sony XB 13

Revision History

    • 2023-04-14: First published.