Gives JBL Flip 5 hard reset directions to restore the 5 to default settings. Hard resetting erases any earlier paired Bluetooth devices from its memory. Clearing these stops the 5 from pairing to any nearby Bluetooth devices after the reset. Also, you might hard reset to get the Flip 5 ready for sale or re gifting. Or, simply reset to stop it from auto pairing with devices you no longer have interest in.
JBL Flip 5 Hard Reset: Step by Step
1. Turn on the JBL Flip 5
Press and hold the Power button until it lights up.
Then, the Power button lights up along with the battery power scale. Here, since we’ve paired the speaker with Bluetooth devices before this, it does not enter Bluetooth discovery mode. We know that because the Power button is glows solid gray, rather than blinking blue.
2. Wait for the Power Up Sound
The JBL Flip 5 plays a rising rock guitar strum sound when it comes on. Then it is ready for use.
3. Press the Volume UP and Play-Pause Buttons Together to Start the Hard Reset
See the next picture to find the Play-Pause and UP Volume buttons.
The Flip 5 then enters hard reset. Note that both the Bluetooth and Power buttons light up gray white for a couple seconds.
Then after a short pause, the Flip 5 turns off. All the lights go off, and it plays the power-down guitar sound.
4. Check that the Hard Reset Worked
Next, power on the device again, as detailed in step 1 above.
Now this time, after hard reset, the Flip 5 comes up in discovery mode. Note that the Bluetooth button blinks white to indicate this. When this button blinks, this means that the unit does not have a current pairing. Indeed, we expect it not to auto pair to anything after a hard reset.
5. Done with JBL Flip 5 Hard Reset !
Hard resetting is now complete. You may now pack up the Flip 5 for sale, or pair it again with your favorite devices. So the unit will no longer automatically connect with any device. So to restore auto pairing, manually pair the Flip 5 with a tablet or phone. Then, any time that both the Flip 5 and that device are in range, auto pairing occurs once more.