These JBL Charge 3 reset instructions show you how to factory reset your JBL Charge 3 Bluetooth speaker to its default settings. Resetting restores this speaker to factory default state. Factory resetting erases any earlier paired Bluetooth devices from its memory. Clearing these stops the Charge 3 from pairing to any nearby Bluetooth devices after the reset. Also, you might reset your JBL Bluetooth speaker to get it ready for sale or re-gifting, or to stop it from pairing with devices you no longer wish it to pair with.
JBL Charge 3 Reset Instructions
1. Turn on the JBL Charge 3
Press and release the power button. It should immediately light up.
Find the power button, as shown in the last picture above.
Then, the Power button comes on, as shown next. In our case, since we’ve paired the speaker with Bluetooth devices before this, it does not enter Bluetooth discovery mode. We know that because the Power button is glows solid gray, rather than blinking blue.
2. Wait for the Power Up Sound
The speaker makes a rising electric guitar strum sound when it powers up. The JBL Charge 3 is ready for resetting after this sound finishes.
3. Press the Volume UP and Play-Pause Buttons Together
See the next picture to find the Pause Play and UP Volume buttons.
The Charge 3 then enters factory reset, as shown in the next picture. Note that both the Power and Connect+ buttons light up for a couple seconds as the hard reset progresses. The Power button glows a pale blue, and the Connect button glows gray-white. We circled these buttons in green, as shown next.
Then after a short pause, the JBL Charge 3 turns off. All the lights go off, and it makes the power-down guitar sound. The next picture shows the JBL Charge 3, powered down. All buttons are dark.
4. Check that your JBL Charge 3 Did Reset
Next, power on the Charge 3 again, as described in step 1 above. In short, press and release the Power button, as shown next.
Now this time, after reset, our speaker immediately comes up in Bluetooth discovery mode, as shown next. We did not have to press the Bluetooth button first, as after a hard reset, the speaker automatically enters Bluetooth pairing mode. Note that the Power button blinks blue to denote Bluetooth discovery mode. When the Power button blinks blue or shows as solid white, the Charge 3 is not currently paired. We expect it not to pair to anything after a reset.
The JBL Charge 3 reset is now finished. You may now pack it up for sale, or pair it again with your favorite Bluetooth devices.
The JBL Charge 3 will no longer automatically pair with any previously paired, in range Bluetooth device in Bluetooth pairing mode. So, to restore automatic Bluetooth pairing, you’ll need to forget the previously paired Charge 3 listed in the Bluetooth devices section of your source device settings. Once you do that, then manually pair the Charge 3 with that device again if so desired. Then after that, any time that both speaker and that device have Bluetooth turned on, pairing with automatically take place once more.
- JBL Flip 2 Reset Instructions, How to Factory Hard Reset JBL Flip 2 Bluetooth Speaker, Someday Perhaps
- Factory Reset Echo Dot 2nd Generation Instructions
- JBL Clip 2 Reset Instructions, How to Reset Speaker
- Factory Reset Alexa Instructions, Dot, Spot, Echo
- JBL Clip 3 Reset Instructions, How to Hard Factory Reset JBL Clip 3 Portable Bluetooth Speaker
- Factory Reset UE Wonderboom Speaker, How To
- Resetting Google Home Mini Speaker Instructions
- Pairing Victor Reader Trek Player with JBL Charge 3 Bluetooth Speaker, How To
- Echo Dot Factory Reset Instructions
- JBL Flip 4 Reset Instructions, How to Factory Reset the JBL Flip 4 Bluetooth Speaker
- Honeywell Thermostat Reset Instructions RTH9580WF
- How to Factory Reset Google Home Original Speaker
- “How do I completely factory reset my Charge 3? I need to remove the updates it has on it.” from BestBuy.com
- TIL how to reset a JBL Charge Bluetooth Speaker? on Reddit.com
- 2019-04-15: Removed ad code. Shortened post title and URL.
- 2018-07-16: First published.