This post covers how to change WiFi on Victor Reader Trek. The Victor Reader Trek GPS navigator and eBook Player media player offers access numerous GPS wireless features as follows.
- Like with the Victor Reader Stream 2, you can download firmware updates directly to it without a personal computer.
- Play internet radio stations.
- Download talking books directly from the National Library Service for the Blind (NLS).
- Get National Federation for the Blind (NFB) News Line updates.
- Listen to thousands of podcasts.
Indeed, the Trek continues the advance of the Victor Reader family of devices further into the realm of a smart device. It offers full accessibility to low-vision and blind users for many online services.
The Role of the WiFi Connection
However, all this new feature-function relies on a Wi-Fi network connection to work correctly. So, like other wireless devices, the Trek must be set to connect to Wi-Fi networks in your home, or anywhere you wish to use these cloud-based features. And, as is also the case, these WiFi networks can change as you move your Trek from place to place, or you upgrade your WLAN router, but use a new network name (SSID) and / or password. In this post, we step through how to add a new WiFi network to your Trek.
This original (first) generation of the Victor Reader Trek, features a voice style prompt system, and thus, has no screen. So with each instruction below, rather than showing pictures, we’ll quote what the Trek says as we execute each command.
How to Change WiFi on Victor Reader Trek
If your Victor Reader had connected to a WiFi at your current location, but no longer does, this could mean the following.
- That network is no longer broadcasting.
- Its SSID has changed.
- Its password has changed.
In any case, you’ll need to program in a current in-range Wi-Fi network, as described below.
1. Turn on the Victor Trek
Press and hold the Power button, located on the left side panel, near the top, as shown next. Hold the button in until the unit vibrates. Release the button then.
The Trek then says, “Welcome to Victor Reader,” followed by a musical sound.
2. Turn Airplane Mode OFF
Skip to the next step if your Airplane Mode setting is already OFF. The Trek cannot connect to any wireless network with Airplane Mode enabled, since this deactivates the Wi-Fi chips inside.
To make sure that airplane mode is OFF, press and hold this round key, with the Wi-Fi symbol embossed on its face, until the Trek announces airplane mode state. Release when you hear the airplane mode announcement begin. If the announcement is, “Airplane mode ON,” then press and hold the button a second time, again releasing when you hear an announcement start. This announcement should be, “Airplane mode OFF.” Note that the online status lamp may begin to blink, which signifies that the Wi-Fi circuitry the Trek is now looking for any networks in its Saved Wireless Network list, that are in-range.
3. Observe that the Trek GPS Enabled Reader is not Connecting to any Wireless Networks
If the wireless network status lamp continues flashing for more than fifteen seconds, or remains dark even though you’ve turned airplane mode off, then the Trek is not able to connect to any in-range Wi-Fi access points that it knows about (those contained in its saved-networks list).
If you are blind, and cannot see the online status lamp, then just assume that if you haven’t heard the, “Connected to Wi-Fi,” voice message after half a minute or so, then the Trek has not connected yet, and is probably unable to establish a Wi-Fi link with the internet. Proceed in that case, to the next step, to enter a network to which the Trek WILL connect.
4. Bring Up the Online Bookshelf to Continue with How to Change WiFi on Victor Reader Trek
Press and quickly release the Wireless key until you hear, “Online bookshelves.” If the Trek says, “Orientation,” or, “Offline bookshelves,” then quickly press and release the Wireless button again, until you hear “Online bookshelves.” You need to be in online bookshelf mode in order to access the wireless network settings as discussed below.
5. Scan for Available Wireless Networks
Press and quickly release the 7 key. This takes you into the Trek’s setup menus. It should say, “Menu, wireless.” If yours says, “Menu, navigation and playback,” then repeat step 4 above, making sure that your Trek has been set to the online bookshelf.
But if the Trek said that you’re now in the Wireless menu, then press and release the 8 or Down-Arrow key a few times until you hear, “Scan for available connections.”
Then, press and release the # (Confirmation) key, found at the lower right corner of the numeric keypad.
After a short pause, the Trek reads the first in-range SSID that it found. This may or may not be the WiFi you want, if your target network is not the only one that is visible to the Trek.
6. Find your Desired In-Range Wi-Fi Network in the List
If the network you want was not announced in the previous step, then move around in this list by pressing the 2 and 8 (Up and Down) keys, pausing briefly after each press, so that you can hear the current network name. Stop navigating when the Trek speaks your desired wireless network SSID.
Note that like the older Victor Reader Stream 2, the Trek does not see 5 Ghz. wireless networks. Only in-range 2.4 Ghz. ones appear in the available networks list.
Press the Confirm (#) key when you hear it. This “chooses” your desired network. The Trek will then prompt you for the password for the Wi-Fi network you just selected.
7. Enter the Network Password if Prompted to Continue with How to Change WiFi on Victor Reader Trek
If the network you’ve chosen requires a password (and we hope all of your Wi-Fi networks do), the Victor Reader will ask you for it by saying, “Enter password.”
Use the keypad to type in the password. Press each key the right number of times to reach the desired character. For example, to enter the letter ‘c’, press the 2 key three times. For the letter ‘s’, press the 7 key four times.
After pressing the right number of times, pause briefly, and the Trek will say the letter you typed in. If this is not right, use the Back (rewind) key to move the insertion point to the wrong character. Then, enter the right one. If you need an upper case letter (passwords are case sensitive), then prior to entering that character, press the Book Mark key. The Book Mark key is the diamond shaped one, found at the top right corner of the keyboard, just to the right of the Wireless key.
When you’ve entered all the password characters, press the Confirm (#) key. This starts connection effort to the selected WiFi network.
When the Trek establishes successful connection, it announces, “Connected to <wireless network name>.” The Trek then asks you to enter a nickname for this connection.
8. Enter a Nickname for this Wireless Network
Once the new connection has been made, the Trek may prompt for a network nickname by saying, “Enter a nickname for this network.” Such names might include Home, Work, Sisters, and so on.
Again, use the numeric keys as described above in step 7, to “type in” a short but memorable name for your new WiFi connection.
The Victor Trek then says, “Connected to <nickname>.”
It may then say, “Please wait.” one or more times, while it checks the Humanware website for software updates. This pause is short however.
9. Test Out your New WiFi Connection
If you wish, you can check that your new WiFi connection is working. For this, run the “Validate Connection,” menu item. This only works if your Trek is connected to a Wi-Fi access point with internet access. This option attempts to download a small file from a known internet site. Then if your network connection was made, and the WiFi you used has internet access, this test succeeds.
Do this as follows. Press the Exit Menu (the star (*) key). The Trek should say, “Leaving menu.”
Then, press and release the 7 key to enter the online settings menu.
Next. repeatedly press and release the 2 or 8 keys until you hear the Trek say, “Validate connection.”
Then, press the Confirm (#) key. The Trek then says, “Completed.” Then, it announces the date and time that the test file was successfully downloaded from Canada.
Enjoy. you’ve now changed WiFi networks on your Victor Reader Trek eBook player and talking GPS navigator.
10. Done with How to Change WiFi on Victor Reader Trek
The comments in this piece apply to Victor Reader Treks that are running Version 1.1.3, Model 513 Trek, of the US English firmware.
Related Posts to How to Change WiFi on Victor Reader Trek
- How to Pair Victor Reader Trek Player with a Bluetooth Speaker
- Changing WiFi Network on Amazon Echo Dot Gen 2 Smart Speaker
- How to Unpair the Victor Reader Trek eBook Reader from a Bluetooth Speaker
- Changing Wi-Fi Network on Original Google Home Smart Speaker
- HumanWare Victor Reader Trek GPS Navigator and DAISY Book Player Picture Gallery
- Change WiFi on Logitech Squeezebox Boom Radio
- Changing WiFi on Victor Reader Stream New Generation eBook Reader
- Bookport Plus Change WiFi Instructions
References for How to change WiFi on Victor Reader Trek
- 2019-04-08: Removed ad code, added key phrase targeting, and more tags.
- 2018-02-11: Originally published.