Picture of the dark CHARGE indicator lamp on the Sony SRS X3 speaker.

Sony SRS X3 Charging Instructions

This piece covers Sony SRS X3 Bluetooth speaker charging directions. Do this easily through the micro USB power in port, shown in the pictures below. Note that you can still play your X3 as it charges, without increasing the recharge time by much, as long as your charger is “hefty” enough.

Sony SRS X3 Charging Summary

So to that end, pick a strong enough USB power adapter.

Next, connect a medium to high current USB cable between the speaker and that adapter (if you’re using a commercial charger with a USB-A output port).  Then, plug the charger into a working wall outlet.

Finally, after three (3) hours or so, your X3 finishes recharging.  So it’s ready to play once more for up to seven (7) hours before needing another recharge.

Sony SRS X3 Charging, Step by Step Instructions

1. Choose Correct Size AC or Car Adapter

The charger you use should provide 5 volts and at least 0.5 amps (2.5 watts). This option though yields much longer charging times.  But ideally, you want a 1.5 amp charger (7.5 watts) for the fastest recharging.  So here, we use a Key Power model HDD15-3-PD USB power delivery system.  Now as mentioned, this speaker needs roughly an amp and a half current to recharge fully in the shortest time.  So this charger supplies way more than enough power to do that job.

2. Power OFF the Unit to Continue with Sony SRS X3 Charging

Note that the SRSX3 still charges when booted.  But depending on how much above-and-beyond recharging capacity your charger offers, the speaker might charge a bit faster when powered OFF.





3. Plug the Micro USB Cord into the X3

Then, plug the small end of the cable into the port on the back of the speaker.

4. Plug the Other End of the Cable into your Charger Adapter

Next, connect the large end of the cord to the AC or car adapter if you’re using this sort of charger. For chargers with permanently attached cables, skip ahead to the next step.

5. Plug the AC Adapter into a Working Wall Receptacle, to Continue with Sony SRS X3 Charging

Now that we connected the X3 and our adapter, we then plug the mains end of the adapter into a working AC outlet, as shown next. We plugged ours into a surge protecting power strip.

Picture of the Sony SRS X3 charging.
The Sony SRS X3 charging.

The CHARGE lamp lights up solid orange on the back of the speaker. And while no battery status gauge shows percentage of charge, this glowing lamp means that charging is occurring, as shown next.

Picture of the orange glowing CHARGE indicator lamp on the X3.
The orange glowing CHARGE indicator light on the X3.

6. Let the X3 Charge Until the Orange CHARGE Light Goes Dark

Full battery charging is complete when the solid glowing lamp turns off.

7. Unplug the Micro USB Cord from the Speaker

8. Done with Sony SRS X3 Charging Tips

We have now fully charged this Sony brick style speaker.

Finally, repeat this charging every seven (7) hours of use to keep the battery in top shape for years to come.

Other Posts About the Sony SRS X3

    1. How to Tell if Sony SRS X3 Speaker is Charging
    2. Connecting to the Sony SRS X3 Speaker
    3. How to Factory Reset Sony SRS X3 Wireless Speaker
    4. Sony SRS X3 Buttons Functions
    5. How to Make Sony SRS X3 Bluetooth Speaker Discoverable

Related Posts to Sony SRS X3 Charging

    1. Sony SRS X2 Charging Directions
    2. JBL Flip 4 Charging Help
    3. Ultimate Ears Wonderboom 2 Charging Tips
    4. Sony SRS XB31 Charging Steps
    5. Sony SRS XB32 Charging Routine

References 

    1. Sony SRS X3 Official Product Page at Sony.com

Revision History

    • 2022-10-11: First published.