This post shows how to connect the Sony X3 Bluetooth brick speaker to Alexa smart speakers. Since this pairing happens between the Sony and Echo devices directly, you need not turn Bluetooth on in the mobile device you’re using to set up this connection.
How to Connect Sony X3 to Alexa, Step by Step
With your X3 switched OFF (the Power lamp is dark), run through this routine to connect it to your Alexa Echo, Show, Studio, Input, and Dot models. We use an iPad Air tablet to set this up.
1. Find the Alexa app on your Mobile Device
We found the app on the iPad Air as shown in the next shot. In this exercise, the app is in a custom folder we set up, called Smart Speakers, pointed at by the green arrow.
![Screenshot of the the Alexa App Icon in Folder on iPadOS.](https://i0.wp.com/tomstek.us/wp-content/uploads/2022/08/Alexa-App-Icon-on-iPadOS-2022.jpg?resize=300%2C225&ssl=1)
2. Run the Alexa App
The app displays its Home screen as we see in the next screenshot.
![Screenshot of the More option on the Alexa App Home screen on iPadOS.](https://i0.wp.com/tomstek.us/wp-content/uploads/2022/08/The-More-Option-on-the-Alexa-App-Home-Screen-on-iPadOS-2022.jpg?resize=300%2C225&ssl=1)
3. Tap the More Item to Continue with How to Connect Sony X3 to Alexa
Find the hamburger item in the lower right corner of the screen. We point at this with the green arrow in the last screenshot.
This brings up the Alexa app’s main menu, as shown in the next screenshot.
![Screenshot of the Settings item on the Alexa app main menu on iPadOS. How to Connect JBL Xtreme 3 to Alexa.](https://i0.wp.com/tomstek.us/wp-content/uploads/2022/08/Alexa-App-on-iPadOS-Main-Menu-Settings-Item-2022.jpg?resize=300%2C225&ssl=1)
4. Tap the Settings Option on the Main Menu
The Settings option is pointed at by the green arrow in the last photo.
This brings up the Settings screen, as shown in the next screenshot.
![Screenshot of the Device Settings item on the Settings Page of the Alexa App on iPadOS.](https://i0.wp.com/tomstek.us/wp-content/uploads/2022/08/Device-Settings-in-Alexa-App-Settings-on-iPadOS-2022.jpg?resize=300%2C225&ssl=1)
5. Tap the Device Settings Option
Touching Device Settings brings up the All Devices page, as we show next.
![Screenshot of an Echo Dot 4 entry on the All Devices page of the Alexa app on iPadOS.](https://i0.wp.com/tomstek.us/wp-content/uploads/2022/08/Echo-Dot-4-on-All-Devices-Page-in-Alexa-App-on-iPadOS-2022.jpg?resize=300%2C225&ssl=1)
From here, choose which Echo device you wish to pair with the X3.
6. Tap the Alexa Device you Wish to Connect
This takes you to the device-specific settings screen for the speaker you chose.
In this demo, we’re pairing from our Thomas’s 2nd Echo Dot 4 speaker to our 300, and so, its device specific settings screen looks as follows.
![Screenshot of the Connect a Device item on the Echo Dot 4 Settings page of the iPadOS Alexa app.](https://i0.wp.com/tomstek.us/wp-content/uploads/2022/08/Connect-a-Device-Item-on-echo-Dot-4-Settings-Page-of-iPadOS-Alexa-App-2022-300x225.jpg?resize=300%2C225&ssl=1)
7. Tap the Connect a Device Item
Find the Connect a Device option pointed at by the green arrow in the last screenshot.
This brings up the Setup screen, as we show next.
![Screenshot of the Pair Bluetooth Device Setup page on the Alexa app on iPadOS.](https://i0.wp.com/tomstek.us/wp-content/uploads/2022/08/Pair-Bluetooth-Device-Setup-Page-on-iPadOS-Alexa-App-2022.jpg?resize=300%2C225&ssl=1)
At this point, your Alexa device scans for nearby Bluetooth devices that are in pairing mode. Here, we selected an Echo Dot 4 earlier. So, this speaker will be the one that scans for BT devices.
Note that our Dot speaker found no devices so far. But it will in the next steps, when we turn on the X3 and put it in pairing mode.
8. Power Up the Sony X3
Bring your speaker close to your Alexa device to pair, and power up that speaker by pressing and releasing the Power button as we show in the next picture.
![Picture of the Power button on the Sony X3 speaker.](https://i0.wp.com/tomstek.us/wp-content/uploads/2022/09/Sony-SRS-X3-Power-Button.jpg?resize=300%2C225&ssl=1)
This light should then start glowing green.
![Picture of the green glowing Power light on the Sony X3 speaker.](https://i0.wp.com/tomstek.us/wp-content/uploads/2022/09/Sony-SRS-X3-Power-Lamp-Glowing-Green.jpg?resize=300%2C225&ssl=1)
And the X3 plays a startup chord.
9. Place the BT Speaker into Pairing / Discovery Mode
Put your speaker into discovery mode by pressing and releasing the Pairing button. Find this button as we show in the next picture. It’s on the top of the speaker, in the front row of buttons, second one in from the left.
![Picture of The pairing button on the Sony X3 speaker.](https://i0.wp.com/tomstek.us/wp-content/uploads/2022/09/Sony-SRS-X3-Pairing-Button.jpg?resize=300%2C225&ssl=1)
When this discovery mode begins, the speaker plays two high beeps, and the Pairing lamp starts fast flashing white.
![Picture of the Pairing light on the Sony X3 speaker flashing white.](https://i0.wp.com/tomstek.us/wp-content/uploads/2022/09/Sony-SRS-X3-Pairing-Lamp-Glowing-White.jpg?resize=300%2C225&ssl=1)
10. Find the Sony X3 on the Alexa App SETUP Page
When you put the speaker into discovery mode, it should then appear in the Alexa app, on the Pair Bluetooth Device… page, as we see next.
![Screenshot of a Sony X3 speaker discovered on the Setup page in the Alexa App on iPadOS.](https://i0.wp.com/tomstek.us/wp-content/uploads/2022/09/Sony-SRS-X3-Discovered-on-Setup-Page-in-Alexa-App-on-iPadOS-2022.jpg?resize=300%2C225&ssl=1)
Note that if your speaker does not show up on this page at this point, then try moving it very close to the Alexa speaker, closing and restarting the Alexa app, and then repeating steps 3 through 7 along with step 9 above. We usually find that this gets the speaker to appear here as it should.
11. Find your Sony X3 on the Discovered Devices List
See the last screenshot above. Our test speaker is there.
12. Finally, Connect your Alexa with your Sony X3
Pair to the speaker by tapping its corresponding entry on the Pair Bluetooth Device… screen, we see in the last screenshot above.
Your Alexa speaker then pairs with the Sony.
The app then takes you back to the Thomas’s 2nd Echo Dot 4 screen, which looks something like the following.
![Screenshot of the Sony X3 BT speaker connected to an Echo Dot 4 on the Device Settings page in the Alexa App on iPadOS.](https://i0.wp.com/tomstek.us/wp-content/uploads/2022/09/Sony-SRS-X3-Connected-to-echo-Dot-4-in-Alexa-App-on-iPadOS-2022-300x225.jpg?resize=300%2C225&ssl=1)
Note that our speaker now shows as connected. Note though that the X3 makes no sounds when a Bluetooth device connects to it. So you won’t hear one when the Echo Dot connects to it either.
The X3 is now connected with your Alexa smart speaker. Its Pairing light glows solid white to signal that successful pairing is in effect.
![Picture of the Pairing light on the Sony X3 speaker glowing white.](https://i0.wp.com/tomstek.us/wp-content/uploads/2022/09/Sony-SRS-X3-Pairing-Lamp-Glowing-White.jpg?resize=300%2C225&ssl=1)
13. Done with How to Connect Sony X3 to Alexa !
We can now ask Alexa to play music or news, and those programs will come out of the 3. Be sure though, to speak to the Echo speaker when making requests, and not the BT speaker. Even though the Sony X3 is now joined with Alexa, the Echo is still the speaker that hears your voice commands through its internal far field microphones.
Related Posts to How to Connect Sony X3 to Alexa
Other Sony X3 Posts
References
Revision History
-
- 2023-03-08: First published.