Picture of the top front of the JBL Flip 6 speaker.

Bass Boost JBL Flip 6 – How to Do It

Unfortunately, turning ON and OFF the bass boost on the JBL Flip 6 does not work. Hopefully, JBL will add this feature back on in a later version of the firmware.

But if this did work, it might function as follows, just as it has on other JBL Flip speakers.  Now when ON, this mode makes the passive bass radiators vibrate more.  Furthermore, bass boost adds a “thumpy” aspect to the content playing. And which makes this speaker sound much bigger than it really is.

Bass Boost on the JBL Flip 6: How to Use

First off, by default, this BT speaker has this bass boost ON. So you already get more treble and lots of extra bass to the audio output. You just can’t turn it OFF.

Picture of the -Pairing- and -Volume Down- buttons on the JBL Flip 6.
The -Pairing- and -Volume Down- buttons on the JBL Flip 6.

Bass Boost JBL Flip 6: How to Turn it OFF

Someday, we hope that you’ll be able to turn the boost OFF. This would work by pressing the Volume Down (-) and Bluetooth buttons.

Then you would hold them in for about ten seconds, or until the oval ring lights up. Find these buttons on the top of the speaker.

Picture of all lights on the button panel glowing.
All lights on the button panel glowing.

Also, to turn extra bass boost back on, again, press the Volume Down and Bluetooth buttons. Then hold them in until the oval button ring lights up again.  Then release them.  Finally, when the ring goes off, bass boost is in effect once more.

Qualifiers

    1. Testing bass boost, we find that it works neither on firmware versions 0.5.2.0 nor 0.6.4.0.

Other Posts About the JBL Flip 6

    1. JBL Flip 6 Software Update Instructions
    2. Button Functions Explained
    3. JBL Flip 6 Specs
    4. Fixing When the Power Button is Not Working
    5. The Trouble of the Blinking Red Light, How to Fix

References

    1. JBL Flip 6 Official Product Page
    2. Where to Buy the JBL Flip 6