Tag: JBL Go Harman
-
JBL Go Blinking Red Light
Many JBL speakers, including the Go 1 very small model, have a blinking red light on the front grill, near the top, when the battery is almost out of power. Sometimes though, this red LED lamp flashes for long periods as you play the Go. E.g. It begins pulsating during play and does not stop,…
-
JBL Go Watts
The JBL Go by Harman Kardon is a low power, hand-held tiny unit with still enough watts to fill a small area around a table with decent sounding tunes. But what do the watts a little wireless speaker has, tell us about how good it is? Firstly, the watt is a quantity of how much…
-
JBL Go Battery Life
The battery life on the JBL Go tiny Bluetooth speaker we discuss in terms of either how long the speaker will play after a full charge, before going dead again. Or, how long the battery will last before a battery replacement is necessary. JBL Go Battery Life Per Charge How long should the battery last? …
-
How to Charge JBL Go
This piece covers how to charge the JBL Go. Do this simply through the USB power in port, on the right side panel of the unit. Note that you can still play your Go 1 while it charges. First, pick a strong enough USB power adapter, as no charger comes with the Go. Next, connect…
-
JBL Go Charging Indicator
The JBL Go has a single LED near the top of the front panel. This displays battery status. It shows whether it’s draining or charging, or whether it’s critically low or not when discharging. But this light does not read out charging progress. Nor does it show battery percentage or how full the battery is.…
-
JBL Go Battery Indicator
The JBL Go has a single LED near the top of the front panel. This displays battery status. It shows whether it’s draining or charging, or whether it’s critically low or not when discharging. But this light does not read out charging progress. Nor does it show battery percentage or how full the battery is.…
-
JBL Go Not Showing Up on Bluetooth
When you find the JBL Go not showing up on Bluetooth, this likely means one or more problems exist. We discuss a comprehensive list of these possibilities to troubleshoot next. JBL Go Not Showing Up on Bluetooth: Simple Causes and Fixes Bluetooth is OFF on the source device. Without Bluetooth running, the source device cannot…
-
How to Put JBL Go in Pairing Mode
To link the JBL Go with a Bluetooth source device, you must know how to activate pairing mode. Why? Because in this mode, the JBL Go broadcasts its Bluetooth name and current linkage details. Then this allows nearby devices to use that information to connect with it. So we show here how to put JBL…
-
How to Make JBL Go Discoverable
To link the JBL Go with a Bluetooth source device, you must know how to activate discovery mode. Why? Because in this mode, the JBL Go broadcasts its Bluetooth name and current linkage. Then this allows nearby devices to use that information to connect with it. So we show here how to make JBL Go…
-
JBL Go Factory Reset
Gives the JBL Go factory reset directions. These return this small Bluetooth speaker to its default settings and state. Plus, this routine wipes any earlier paired BT devices from the speaker’s memory. And this stops the Go from pairing to any nearby Bluetooth devices afterwards. Also, you might factory reset to make this speaker ready…