Tag: JBL Go I
-
JBL Go Red Light Stays ON
Many JBL speakers, including the Go 1, sport a status light that blinks red when the battery is low, and continuously shines red while charging / recharging . Sometimes though, this light stays on. E.g. It does not turn off once charging is done, and this is concerning for many JBL Go owners. So in…
-
JBL Go 1 Buttons
The JBL Go line of highly portable wireless speakers features several buttons on the right side, one lamp on the front grill, a set of ports on the left side. The status lamp lights in two colors and flashing patterns to show speaker pairing and battery status. In this JBL Go 1 buttons pamphlet, we…
-
JBL Go Battery Life
The battery life on the JBL Go tiny Bluetooth speaker we discuss in terms of either how long the speaker will play after a full charge, before going dead again. Or, how long the battery will last before a battery replacement is necessary. JBL Go Battery Life Per Charge How long should the battery last? …
-
JBL Go 1 Charging Indicator
The JBL Go 1 has a single LED near the top of the front panel. This displays battery status. It shows whether it’s draining or charging, or whether it’s critically low or not when discharging. But this light does not read out charging progress. Nor does it show battery percentage or how full the battery…
-
JBL Go 1 Battery Indicator
The JBL Go 1 has a single LED near the top of the front panel. This displays battery status. It shows whether it’s draining or charging, or whether it’s critically low or not when discharging. But this light does not read out charging progress. Nor does it show battery percentage or how full the battery…
-
How to Put JBL Go 1 in Pairing Mode
To link the JBL Go 1 with a Bluetooth source device, you must know how to activate pairing mode. Why? Because in this mode, the JBL Go 1 broadcasts its Bluetooth name and current linkage details. Then this allows nearby devices to use that information to connect with it. So we show here how to…
-
JBL Go 1 Not Showing Up on Bluetooth
When you find the JBL Go 1 not showing up on Bluetooth, this likely means one or more problems exist. We discuss a comprehensive list of these possibilities to troubleshoot next. JBL Go 1 Not Showing Up on Bluetooth: Simple Causes and Fixes Bluetooth is OFF on the source device. Without Bluetooth running, the source…
-
JBL Go 1 Factory Reset
Gives the JBL Go 1 factory reset directions. These return this small Bluetooth speaker to its default settings and state. Plus, this routine wipes any earlier paired BT devices from the speaker’s memory. And this stops the Go 1 from pairing to any nearby Bluetooth devices afterwards. Also, you might factory reset to make this…
-
How to Charge JBL Go 1
This piece covers how to charge the JBL Go 1 Bluetooth speaker. Do this simply through the USB power in port, on the right side panel of the unit. Note that you can still play your Go 1 while it charges. First, pick a strong enough USB power adapter, as no charger comes with the…
-
How to Hard Reset JBL Go
We show you here how to hard reset a JBL Go Bluetooth speaker, to restore it to its default hard settings. This restores this speaker to hard default state. Plus, it wipes any earlier paired Bluetooth devices from the speaker’s memory. Clearing these stops the Go from pairing to any nearby Bluetooth devices afterwards. Also,…