Perform this HP DeskJet 3632 setup routine to clear out the existing WiFi settings on the printer and connect it to a different Wifi network.
Changing WiFi networks becomes necessary after replacing a router / access point that has a different network name or password than the old network. You’d also likely do this when moving the printer to a different office or home location. So, here’s how it’s done.
We assume here that you have previously installed HP’s All-In-One app and configured it on a mobile wireless device you normally print from. So we won’t delve into setting up that app here in this post.
HP DeskJet 3632 Setup Instructions for this WiFi All in One Printer
1. First, Reset Printer’s Wireless Settings back to Factory Default Values
Hard reset the printer by following the instructions in our How to Reset HP Printer, 3630 Series DeskJet article.
2. Find the HP All-In-One (AiO Remote) Printer Support App
We’re running an iOS-based tablet here
3. Run the AiO Remote App by Tapping It to Continue with HP DeskJet 3632 Setup Instructions
It then comes up as shown next.
In our case, we had this printer configured previously. So it shows up at the top of the AiO Remote home screen, as pointed at in the previous picture by the blue arrow. If you’re setting up the printer on a different mobile device that what you used before the Wi-Fi network changed, then skip the next step, as the app will immediately give you the opportunity to add a printer.
4. Tap the Offline Printer
Note the red dot by the printer name, above the ink cartridge status indicator, which means that your tablet is unable to connect to the printer through the current wireless network. Tapping this entry gives you the opportunity to select a different printer, as shown in the next picture.
5. Tap the Select a Different Printer Option
Find this highlighted in the previous picture. You then get the My Printer screen, as shown next.
6. Tap the Add Printer Link to Continue with HP DeskJet 3632 Setup Instructions
Top right corner of screen. This brings up the Add Printer window, as pictured next.
7. Tap the Set up and Add a New Printer Option
This brings up the Agreements screen, as displayed next.
8. Read the Agreements Screen to Continue with HP DeskJet 3632 Setup Instructions
If you accept, then check the I have reviewed and accept the agreements and settings check box, and move on to the next step. If not however, then close the app, without setting up the printer.
9. Tap the Continue Button
This brings up the Connect to Printer screen, as shown next.
10. Bring Up your Mobile device’s Wi-Fi Settings Screen
Find the Wi-Fi Settings as shown next. For our iPad, we pressed the home screen, ran the Settings app, and then tapped Wi-Fi settings. The results of those actions are shown in the next picture.
11. Tap the HP-Setup>F5-DeskJet 3630 series Network to Continue with HP DeskJet 3632 Setup
This action temporarily disconnects your tablet from your usual Wi-Fi network, and connects it to this temporary HP hotspot network that the printer broadcasts while in setup mode. A screen such as the following then displays.
12. Tap the Notification to Go Back to the AiO Remote App
If the notification disappears before you have a chance to tap it (you only have a few seconds to poke it before it goes away), then just close the Wi-Fi Settings window, locate the AiO Remote app on your Home screen as in step 2 above, and tap on that. Either way you choose, the AiO app then displays the Connect Printer to Network screen.
13. Tap the Desired Wi-Fi network for Connecting the HP 3632 Printer
In our case, we’re connecting this printer to the 937T681J4059H_2G Wi-Fi network. Tapping the desired network brings up the password entry screen, as shown next.
14. Enter your Wireless Network Password to Continue with HP DeskJet 3632 Setup Instructions
Type the password into the field arrowed in the previous picture, and then hit the Return or Go key. The 3632 printer then attempts to connect to the selected network, and the screen pictured next should appear briefly on your tablet.
15. Watch the Wireless Status Lamp
That light stops flashing and glows a steady white once the printer successfully connects to the selected network, as shown in the next picture.
On the tablet, the Reconnect your iPad to your network screen displays, as shown next.
However, we’ve noticed that sometimes, the Connecting screen in step 14 above does not disappear, even after the printer itself has connected. When this occurs, we simply close the AiO app with the Home key, and then reopen it. The screen just previous then appears.
16. Reconnect your Mobile Device to your Wi-Fi Network
Go back to your tablet’s Wi-Fi settings screen and locate your original wireless network and connect to it. Note that this may happen automatically once your printer connects. However, if not, just do it manually.
17. Return to the AiO Remote App Home Screen to Continue with HP DeskJet 3632 Setup Instructions
Do this by closing the Wi-Fi Settings screen in the previous step (hit the Home key), and again bringing up the HP AiO Remote app, as you did in step 2 above. If the AiO home screen does not appear, then press the Home icon in whatever AiO Remote screen is showing. This should take you there. At any rate, the app Home screen you see next, however you get there, should resemble the following.
18. Verify that Printer is Now Visible in the AiO Remote App
Note the green status light beside the 3632 printer, pointed at by the pink arrow, indicating that the printer is indeed connected to your chosen Wi-Fi network, and is now online.
19. You’re Done with these HP DeskJet 3632 Setup Instructions !
Your HP 3632 wireless printer is now ready to print from the mobile device you used in this procedure to connect it. Enjoy.
Related Posts to HP DeskJet 3632 Setup Instructions
- Belkin F9K1106v1 WiFi Booster Setup Instructions
- Honeywell Thermostat WiFi Setup RTH8580WF
- Echo Dot 3 Setup Instructions for Amazon Alexa 3rd Generation Dot
- Belkin F9K1122v1 N600 Plug In WiFi Range Extender Setup Instructions
- Alexa Echo Subwoofer Setup Instructions for Amazon Echo Sub Speaker
- Netgear EX3700 Setup Instructions, How To
- http //belkin.range/Setup Instructions for the F9K1106v1 N600 Belkin Wi-Fi Extender
- Gosund Mini WiFi Outlet Setup Instructions
- Alexa Echo Dot WiFi Setup Instructions
- Google Home Setup Instructions for their First Speaker
- Echo Dot 2nd Generation Setup Instructions
- Ultimate Ears Wonderboom Setup Instructions
- Pandora Setup on Google Home Instructions
- Honeywell RTH9580WF WiFi Setup Instructions
- Xerox Phaser 3150 Printer Setup Instructions
- Belkin Range Extender Setup F9K1106v1 Instructions
- Ultimate Ears Wonderboom 2 Setup Instructions
Other Posts About the HP DeskJet 3632 Printer
- How to Install HP DeskJet 3630 Series Wireless Printer
- How to Reset HP Printer, 3630 Series DeskJet
- HP Deskjet 3630 Series Ink Cartridges Details
References for HP DeskJet 3632 Setup
- 2019-04-29: Added key phrase targeting and more tags.
- 2018-12-07: Added more subheadings.
- 2017-01-26: Updated tags list. Changed this article’s title to: HP DeskJet 3630 Series Wireless Printer Setup Instructions.
- 2017-01-23: Moved the parts describing how to reset the printer, out to the How to Reset HP Printer, 3630 Series DeskJet article.
- 2017-01-22: Originally published.