How to Reset Echo Alexa Smart Speakers

A full reset Echo Alexa routine is needed sometimes.  Why?   Because perhaps you desire to sell your old Echo device. Or perhaps you just want to connect your speaker to a new Amazon account, or to another WiFi network. So, with those needs to consider, this post details how to reset Echo Alexa assistant speakers.  For that, follow the steps below.  We  cover Echo Alexa Gens 1 and 2, the Echo Spot, and the Dot Gens 1, 2, and 3.  We do not however cover the Echo Plus, Show, or Input devices here.  Not yet anyhow.

Resetting unlinks the Echo Alexa from its current Amazon account.  Resetting also assures that the Echo speaker erases its Wi-Fi settings from internal memory.

Warning: After Echo Alexa reset, your speaker will not function until set up anew.

Also, you can sometimes avoid set up time after resetting. How?  Before resetting, try powering down the Echo Alexa for ten to fifteen seconds. E.g. Unplug its power cable from the wall outlet.  Wait five to ten seconds.  Then plug it back in  again.  Powering down then up, often brings back proper function without the headaches running a full reset. But if this does not fix the speaker, then read on for how to do a full Echo Alexa reset.

How to Reset Echo Alexa Gen 2 Speaker

1. Plug Echo 2 into AC Power

Connect the speaker to its AC adapter. The light ring then glows blue for a period, and then goes OFF.  When it darkens, booting has finished.

Picture of the Amazon Echo 2nd gen Amazon Echo smart speaker, powering up.

Amazon Echo 2nd gen Alexa smart speaker, powering up.

The next picture shows this 2nd generation Echo Alexa speaker standing by, ready for reset.

Picture of the Amazon Echo Gen 2 smart speaker, top front view, showing ready for factory default reset.

Our Amazon Echo Gen 2 smart speaker, top front view, showing ready for factory default reset. How to reset Echo Alexa.

2. Press the Echo Alexa Gen 2 Speaker Reset Button Combo

See our   Where is the Reset Button on Echo Generation 2 Alexa Smart Speaker Located   post, for details on how to find the reset button on this unit.  We show where these buttons are in the next picture.

Picture of the Amazon Echo Gen 2 smart speaker reset button location. It's a button combination of the Mic Mute and Volume Down buttons, as circled in purple

Amazon Echo Gen 2 Smart Speaker reset button location. It’s a button combination of the Mic Mute and Volume Down buttons, as circled in purple.

Wait for the light ring to darken completely.  Then, press and hold the  Mic Mute and  Volume Down  buttons at the same time for five to ten seconds.

3. Wait for the Gen 2 Echo Reset to Finish

After a, perhaps ten second pause, the light ring darkens for maybe six seconds.  Then the ring glows orange.  Details next.

Picture of the Amazon Echo 2nd generation Alexa speaker, in setup mode, displaying an orange light ring.

Amazon Echo 2nd generation Alexa speaker, in setup mode, displaying an orange light ring. How to reset Echo Alexa.

Your Echo Alexa Gen 2 smart speaker is now reset.  After resetting, the speaker enters setup mode, as shown by the circling orange-yellow blip on the light ring.

4.  All RE-set!

How to Reset Echo Alexa Generation 1 Tower Speaker Instructions

1. Attach Power Cable

Connect the Echo Alexa speaker to its AC wall adapter.

Picture of the Amazon Alexa Echo Gen 1 smart speaker, bottom view, with AC power adapter connector inserted.

Our Amazon Echo Gen 1 smart Alexa speaker, bottom view, with AC power adapter connector inserted.

Wait for the Echo 1 to power up and for the light ring to either go out or turn purple. Purple means that it could not connect to a WiFi network.

Picture of our Amazon Echo Gen 1 smart speaker, front view.

Our Echo Alexa Gen 1 smart speaker, front view. How to reset Echo Alexa.

2. Press Factory Reset Button

Find the reset button on the bottom (underside).

Picture of the Amazon Echo Generation 1 smart speaker bottom view, showing the reset button location Highlighted.

Our Echo Generation 1 Alexa smart speaker bottom view, showing the reset button location Highlighted.

Press and hold the reset button with a pen or straightened safety pin for five to ten seconds. Release it when the light ring changes color.

3. Release the Reset Button

Once the ring flashes, the factory reset is now under way.  So you need no longer keep pressing the reset button.

4. Wait for the Reset Program to Finish

After a several-seconds pause, the light ring darkens for a few seconds, and then turns orange.

5. What Happens After Echo Alexa Reset

Your Amazon Echo Gen 1 tower speaker is restored to its factory default settings and has entered setup mode.

How to Reset Echo Alexa Dot 3rd Generation Instructions, How To

1. Connect the Power Cable

First, connect the Echo Dot 3 speaker to its AC adapter cord, as shown next.

Picture of the Echo Dot 3rd Generation speaker AC power adapter, plugged into speaker back.

Amazon Echo Dot gen 3 speaker AC power adapter, plugged into speaker back. How to reset Echo Alexa.

2. Next, Plug the Adapter End into a Working Wall Outlet

See this as shown next.

Picture of the 3rd Generation Echo Dot smart speaker powering up, showing its AC adapter plugged into standard wall outlet.

Amazon Echo Alexa Dot Gen 3 smart speaker powering up, showing its AC adapter plugged into standard wall outlet.

Then, wait for the Echo Dot 3 to finish booting.  That’s done when either the light ring goes dark, or it starts flashing orange, red, or purple.

3. Next, Press and Hold the Action Button for Five Seconds

Hold in the  Action  button until the light ring turns orange, and the Dot 3 says that it is entering Setup mode.  On this 3rd gen of the Echo Alexa Dot line, the  Action   button also functions as the Reset button.  Find it pointed at by the green arrow in the next picture.

Picture of the Echo Dot 3rd generation speaker, top view, showing the Action button highlighted.

Our Echo Dot 3 speaker, top view, showing the Action button highlighted. How to reset Echo Alexa.

4. Finally, What Happens After Echo Alexa Dot 3 Reset?

Your Dot 3rd Generation smart speaker is now restored to its factory state, and has entered setup mode.

How to Reset Echo Alexa Dot Gen 2 Instructions

Power up this speaker before resetting.

How to factory reset Amazon Echo Dot. Picture of the Echo Dot 2nd Gen speaker, out of box, with protective plastic removed. Ready for reset.

Showing the 2nd gen Echo Dot speaker, out of box, with protective plastic removed. Ready for reset.

1. Connect your Echo Dot 2 to Power

Connect the 2nd Gen Dot to its USB power adapter. The light ring glows blue for a time, and then goes dark. This means successful startup.

2. Press the Echo Dot 2 Reset Button Combo

See our  Where is the Amazon Echo Dot Reset Button  post, for details on how to find the reset button on the 1st and 2nd gen Echo Alexa Dot devices.

Then, once the light ring goes OFF, press and hold the  Mic Mute  and  Volume Down   buttons. Press these at the same time for the same amount of time.

3. Wait for Echo Dot 2 Resetting to Finish

After a several-seconds wait, the light ring again goes black, and then glows orange.

4. Echo Alexa Dot 2 Reset Now Done

You have now reset your Echo Dot 2 speaker and restored its factory default settings. It has now entered setup mode.

5. Done!

How to Reset Echo Alexa Generation 1 Dot Instructions

How to factory reset Amazon Echo Dot. PPicture of the Amazon Echo Dot 1st generation speaker, front top view.

Showing the 1st Generation Echo Dot smart speaker, front top view. How to reset Echo Alexa.

1. Power Up the Echo Dot 1

Connect the 1st Gen Echo Alexa Dot to its USB power supply. The light ring then illuminates blue for a jiffy, and then goes off once the Dot finishes booting.

2. Press the Echo Dot 1 Factory Reset Button

Once the light ring goes black, use a paper clip end to press in and hold the  Reset  button. Keep pressing for five to ten seconds. Then, let it go when the light ring turns orange, and then blue.

3. Wait for the Echo Alexa Dot 1 Reset to Complete

After a several-seconds pause, the light ring goes black for a brief few seconds, and then turns orange.

4. Echo Dot 1 Factory Reset Now Done

You have now restored your Echo Alexa Dot 1st Gen speaker to its default state. The speaker enters setup mode after resetting.

How to Reset Echo Alexa Spot Instructions 

1. Swipe Down from Screen Top

Pull down the main menu screen on your powered up Echo Alexa Spot speaker, as shown in the next pictures.

Picture of a finger swiping down from the top of the screen on the Amazon Echo Spot speaker, to pull down the main menu.

The Echo Spot Alexa speaker. Showing swiping down from top of screen for the main menu.

This reveals the Spot’s control menu, as shown next.

Picture of a finger continuing to swipe down toward the center of the Amazon Echo Spot speaker screen, to reveal its main menu.

Our Spot Echo speaker. Continuing to swipe down toward screen center reveals main menu. How to reset Echo Alexa.

2. Tap the  Settings  Button

This is the gear-shaped icon near the top right edge of the main menu screen. See this control pointed at by the green arrow in the next picture.

Picture of the Amazon Echo Spot speaker, displaying its Main Menu screen, with the Settings button highlighted.

An Echo Spot Alexa speaker, displaying its Main Menu screen, with the Settings button highlighted.

The  Settings  screen then displays, as shown next.

Picture of the Amazon Echo Spot Alexa speaker, displaying its Settings screen.

The Echo Spot video speaker, displaying its Settings screen.

3. Scroll Down the  Settings  Screen

You can move around the  Settings  screen by moving finger up on the Spot’s touchscreen.

You’re looking for the  Device Options  item.

Picture of the Amazon Echo Spot speaker, displaying its Settings screen. Showing a finger swiping up to scroll down through the list of settings.

Amazon Echo Spot speaker, displaying its -Settings- screen. Showing a finger swiping up to scroll down through the list of settings.

4. Stop Swiping when you See the Device Options Menu Item

See this item displayed next.

Picture of the Amazon Echo Spot speaker, showing its Settings menu, with the Device Options item highlighted.

Amazon Echo Spot speaker, showing its Settings menu, with the Device Options item highlighted. How to reset Echo Alexa.

5. Tap the  Device Options  Item

This brings up the Device Options screen, as shown next.

Picture of the Amazon Echo Spot Alexa speaker, displaying its Device Options screen, at top of the options list.

Amazon Echo Alexa Spot visual speaker, displaying its Device Options screen, at top of the options list.

6. Move Finger Up on Screen

This scrolls down through the  Device Options  list.

You are looking for the  Reset to Factory Defaults   option, as shown next, pointed at by the green arrow.

Picture of the Amazon Echo Spot smart speaker, showing the Reset To Factory Defaults option highlighted on its Device Options screen.

The Echo Spot smart speaker, showing the Reset To Factory Defaults option highlighted on its Device Options screen.

7. Tap the  Reset to Factory Defaults  Option

You then get the Reset to Factory Defaults confirmation screen.  Here, Echo Spot warns that factory resetting will unregister it from our Amazon account. Then, it says that after reset, we can re register Echo Spot again.  For that, you can use either the same Amazon account, or a different one.  Finally, the Spot asks if we really want to reset it.

Picture of the Amazon Echo Spot talking speaker, displaying its Reset To Factory Defaults screen, with the Yes-Continue button highlighted.

Our Echo Spot talking speaker, displaying its Reset To Factory Defaults screen, with the Yes-Continue button highlighted.

8. Tap the Yes Button

That is, tap the right arrow button. Find the arrow in the lower right edge of the touchscreen.  The green arrow points at it in the last picture.

9. The Reset Echo Alexa Spot Process Begins

The Echo Spot then begins its reset routine.  It tells us this by briefly displaying an orange light ring as shown next.

Picture of the Amazon Echo Spot speaker, showing orange light ring as Factory Reset operation starts.

An Echo Alexa Spot speaker, showing orange light ring as Factory Reset operation starts. How to reset Echo Alexa.

Alexa Spot Goes Dark Briefly

Next, after several seconds, the Echo Spot powers off, and accordingly, its screen goes dark and blank.  Shown next.

Picture of the Amazon Echo Spot smart speaker with dark screen. It is powered off.

Amazon Echo Spot smart speaker with dark screen. It is powered off.

Echo Spot Starts Booting

After another few seconds, the Spot comes on again and starts booting.  The Amazon logo screen first appears as shown next.

Picture of the Amazon Echo Spot speaker booting, showing the Amazon logo screen.

Video Echo Alexa Spot speaker booting, showing the Amazon logo screen. How to reset Echo Alexa.

Next, a sort of Wait screen displays, with a white light ring and flashing blue dots, as shown next.

Picture of the Amazon Echo Spot Alexa speaker booting, displaying its Wait screen.

Video Alexa Echo Spot Alexa speaker booting, displaying its Wait screen.

Various Logo Screens Then Pop Up

Then, the Echo logo screen appears. While this is up, the speaker erases all prior WiFi and account infor from its memory, as shown next.

Picture of the Amazon Echo Spot visual speaker booting, showing its Echo logo wait screen.

Echo Spot visual speaker booting, showing its Echo logo wait screen. How to reset Echo Alexa.

Then, the Optimization Process Begins  

Optimization consumes the most time during the reset process, taking several minutes to finish.  As it runs, the Echo Spot displays a round progress bar ring. The brighter part of this ring slowly advances while it optimizes its software.  Shown in the next three pictures.

Picture of the Amazon Echo Spot mini speaker, showing the start of its Optimizing operation.

Amazon Echo Spot mini speaker, showing the start of its Optimizing operation.

 

Picture of the Amazon Echo Spot Alexa speaker, in middle of Optimizing operation.

Echo Alexa speaker, in middle of Optimizing operation.

 

Picture of the Amazon Echo Spot speaker, finishing up optimization after factory reset.

Echo Spot Amazon speaker, finishing up optimization after factory reset.

10. Finally, the Echo Alexa Spot Reset Process Finishes

Next, after speaker software optimization finishes, the Spot shows the blue Getting Your Device Online… screen, as shown next.

Picture of the Amazon Echo Spot speaker with Alexa, displaying its Getting Your Device Online screen.

Echo Alexa Spot speaker, displaying its Getting Your Device Online screen. How to reset Echo Alexa.

Lastly, after several seconds, the reset finishes.  You’ll know it’s done successfully when the  Select Device Language   screen appears, as shown next.

Picture of the Amazon Echo Spot Alexa speaker, displaying its Select Device Language screen.

The Echo Alexa Spot Alexa speaker, displaying its Select Device Language screen.

Set Up Echo Alexa Again, or Pack it Up

You may now unplug, pack, and give your Echo to someone else.  Do not fear that they’ll have access to its settings on your personal Amazon account. They will not.  The reset cleared those prior values from the Echo.

Or, you can set it up once again on your existing account. Once the light ring turns orange, the unit stays in setup mode until someone runs the setup routine. The Echo will not function until properly set up and linked to an Amazon account.

Related Posts

References

Suggested Reading

Revision History

  • 2019-05-17: Tuned the targeting for ‘How to Reset Echo Alexa’ and added tags.
  • 2019-02-15: First published.




Reset Echo Dot 3rd Gen Alexa Speaker, How To

Here, we demo how to reset Echo Dot 3rd Gen speaker.  So why would you ever do this?  Well, you may decide to sell or give your Dot 3 to another person.  Or link it to a different Amazon account.  Or connect it to a different WiFi network.  In all these cases, resetting is the best way to clean out all old account data from the Dot.  Resetting gets it ready to use on a new account and / or Wi-Fi network.

To unlink the Echo Dot 3rd Generation from its current Amazon Alexa account, perform the routine below.

Note that if you’re just trying to fix erratic behavior of the Echo Dot Gen 3, you may not need a complete factory default reset. So, before resetting, try powering off the Dot 3 for fifteen seconds.  Do this by disconnecting its power cable either from the wall outlet, or from the speaker itself.  Then, wait for a quarter minute, and then plug it back in. Rebooting often restores proper operation. But if not, read on for the proper hard reset procedure.

Once reset, you’ll no longer be able to control the Echo Dot 3 from the account where you controlled it from before.  To regain control via the previous account, run through the setup procedure again.  There, relink the Dot 3 to that account again via the Alexa app.

How to Reset Echo Dot 3rd Gen

1. Connect Wall Power Cable

First, plug in the Dot 3rd Gen speaker to its 12-volt power adapter AC cord, as shown next.

Picture of the Amazon Echo Dot gen 3 speaker AC power adapter, plugged into speaker back.

Amazon Echo Dot gen 3 speaker AC power adapter, plugged into speaker back. Reset Echo Dot 3rd Gen.

2. Next, Plug the AC Adapter into a Working Wall Outlet

See this as shown next.

Picture of the Amazon Alexa Echo Dot Gen 3 smart speaker powering up, showing its AC adapter plugged into standard wall outlet.

Amazon Alexa Echo Dot Gen 3 smart speaker powering up, showing its AC adapter plugged into standard wall outlet. Reset Echo Dot 3rd Gen.

Then, wait for the Echo Dot to complete powering up.  It’s finished when either the light ring goes completely dark, or flashes orange, red, or purple.

3. Next, Press and Hold the Action Button for 5 to 10 Seconds

Depress the Action button until the light ring turns orange, and the 3rd Gen Dot announces that it is entering setup mode.  On this Dot, the Action button also functions as the Reset button, and is pointed at by the green arrow in the next picture.

Picture of the Amazon Echo Dot 3 speaker, top view, showing the Action button highlighted.

Amazon Echo Dot 3 speaker, top view, showing the Action button highlighted.

4. Finally, What Happens After Echo Dot 3rd Gen Reset?

Your Echo Dot 3rd Gen smart speaker is now restored to its factory default settings and has entered setup mode, as shown next.

Picture of the Amazon Alexa Echo Dot 3rd Generation speaker, shown in Setup mode, light ring orange and spinning.

Amazon Alexa Echo Dot 3rd Gen speaker, shown in Setup mode, light ring orange and spinning. Reset Echo Dot 3rd Gen.

Pack  Up 3rd Gen Echo Dot or Set it Up Again

You may now give your 3rd Gen Echo Dot to another without fear that they’ll have access to the Alexa settings on your Amazon account. Or, you can set it up again on your existing account. But if transferring to another person, we suggest that you pack the Dot in its original carton if you have it, for safest transport through the mail, as shown in the next picture.

Picture of the Echo Dot 3rd Gen speaker box, front view.

Echo Dot 3rd Gen speaker box, front view.

Related Posts

Suggested Reading

References

Change Log

  • 2019-05-09: Tuned the targeting for ‘ Reset Echo Dot 3rd Gen.’, and added tags.
  • 2019-02-06: First posted.




Factory Reset Echo Dot 2nd Generation Instructions

You may wish to do a master factory reset Echo Dot 2nd generation speaker.  Why?   Because perhaps you wish to sell your old Alexa Gen 2 Dot to a friend. Or you just want to connect the 2nd Gen Dot to a different Amazon account, or to a new WiFi network.  So, to that end, in order to reset your 2nd generation Echo Dot to factory default condition, follow the directions next.

Resetting unlinks the speaker from its current Amazon Alexa account, and assures that it forgets its current Wi-Fi connection information.  So be warned that after the reset, your Alexa Echo Dot speaker will not work until it’s been properly set up again.

Picture of the Alexa Echo Dot Gen 2 in Setup Mode, after factory reset, showing Light Ring with orange blip circling.

Factory Reset Echo Dot 2nd Generation: The Alexa Echo Dot Gen 2 in Setup Mode, after factory reset, showing Light Ring with orange blip circling.

Factory Reset Echo Dot 2nd Generation Instructions

Note that factory reset of the Echo Dot 1 and Echo Dot 2 devices is essentially the same procedure; just the location of the reset button on each is different.

1. Connect to AC Power

Connect the Echo Dot to its USB power adapter.  The light ring will illuminate blue for a time, and then go out, indicating that boot up has completed.

2. Press the Echo Dot Reset Button

See our  Where is the Echo Dot Reset Button   post, for more details on how to find the reset button on the 1st and 2nd generation Echo Dot devices. But we’ll give you a hint in the next picture.

Picture of the Amazon Echo Dot 2nd Gen, with Reset Button Combination Highlighted. Includes the Mic Off and Volume Down buttons.

Amazon Echo Dot 2nd Gen, with Reset Button Combination Highlighted. Includes the Mic Off and Volume Down buttons.

With the Dot 2 powered up, press and hold the Mic Off and Volume Down buttons until the factory reset starts.  Release them once the light ring changes patterns.

3. Wait for Hard Reset to Finish

After a several-seconds pause, the light ring goes completely dark for a few seconds, and then turns orange.

4. Factory Reset Echo Dot 2nd Generation Now Finished

Your Echo Dot speaker has now been reset to its factory default settings and has entered setup mode.

5. Set Up Again, or Pack Up you Echo Dot Speaker

You may now disconnect, package up, and bestow your Echo Dot 2nd generation smart speaker to someone else without worry that they’ll access your Amazon account Alexa settings.  Those prior values are now erased from the your Echo Dot.  Or, you can set the Dot 2 up once again on your current account. Once the light ring turns orange, the unit stays in Setup until someone runs the Alexa setup procedure again.  Note that the Echo Dot 2nd generation Alexa will not function until rightly set up and linked once again to an Amazon account.

6. Factory Reset Done!

Related Posts

References

Revision History

  • 2019-05-04: Tuned the targeting for ‘Factory Reset Echo Dot 2nd Generation’, and added tags.
  • 2019-01-11: First posted.




Reset Echo Dot 2nd Generation, How To

You may wish to reset Echo Dot 2nd Generation to factory settings because you wish to sell it. Or you just want to set it to another Amazon account, or to a new WiFi network. So, in that vein, to reset your Echo Dot smart speaker to factory settings, just run through the following steps.

Logitech Factory resetting unlinks the 2nd generation Echo Dot Alexa unit from its current Amazon account.  So, it forgets its current Wi-Fi connection settings. So beware that after the factory reset, your Echo Dot 2 will likely not work until after it’s been properly set up again.

Picture of the Amazon Echo Dot 2nd Gen speaker, out of Box, with protective plastic removed. Currently powered off, but ready for plugin. Reset Echo Dot 2nd generation.

Amazon Echo Dot 2nd Gen speaker, out of Box, with protective plastic removed. Currently powered off, but ready for plugin. Reset Echo Dot 2nd generation.

Reset Echo Dot 2nd Generation to Factory Settings

Note that factory reset of the Echo Dot 1 and Echo Dot 2 devices is about the same. Just the location of the reset button on each differs.

1. Connect to Power

Connect the Echo Dot to its USB power adapter. The light ring will illuminate blue for a time, and then go out, indicating that boot up has completed.

Picture of the Amazon Echo Dot 2nd generation smart speaker, top view. Reset Echo Dot 2nd generation.

Amazon Echo Dot 2nd generation smart speaker top view. Reset Echo Dot 2nd generation.

2. Press the Echo Dot Reset Button

See our Where is the Echo Dot Reset Button post, for details on how to find the reset button on the 1st and 2nd generation Echo Dot devices.

Picture of the Amazon Echo Dot 2nd Gen, with Reset Button Combination Highlighted. Includes the Mic Off and Volume Down buttons. Reset Echo Dot 2nd generation.

Amazon Echo Dot 2nd Gen, with Reset Button Combination Highlighted. Includes the Mic Off and Volume Down buttons. Reset Echo Dot 2nd generation.

Anyway, wait for the light ring goes completely dark.  Then, for the Echo Dot 2, press and hold the Mic Mute and Volume Down buttons (shown in the last picture) at the same time, for the same amount of time.

3. Wait for Factory Reset to Finish

After a several-seconds pause, the light ring goes completely dark for a few seconds, and then turns orange.

Picture of the Amazon Alexa Echo Dot Gen 2 speaker. powered up and fully booted. Reset Echo Dot 2nd generation.

Amazon Alexa Echo Dot Gen 2 speaker, powered up and fully booted.

4. Reset Now Finished

Your Echo Dot speaker has now been reset to its factory default settings and has entered setup mode, as shown next.

Picture of the Amazon Echo Dot Gen 2 in Setup Mode, showing Light Ring with orange blip circling.

Amazon Echo Dot Gen 2 in Setup Mode, showing Light Ring with orange blip circling.

5. Set Up Again, or Pack Up

You may now unplug, pack, and give your Echo Dot to someone else without fear that they’ll have access to the Alexa settings on your personal Amazon account. Those prior values have now been erased from the your Echo Dot. Or, you can set it up once again on your existing account. Once the light ring turns orange, the unit remains in setup mode until someone executes the published setup procedure. The Echo Dot will not function until properly set up and linked to an Amazon account.

6. Done!

Related Posts

References

Revision History

  • 2019-05-04: Added tags.
  • 2019-04-15: Tweaked the targeting.
  • 2018-12-12: First published.




Echo Dot Reset Instructions, How to Reset Echo Dot

We list our posts that offer how Echo Dot reset works for the Amazon Alexa smart speakers of all generations when gifting or selling the unit. First, they show master reset button locations and describe various resetting procedures unique to each smart speaker.  Then, they discuss when to reset, what resetting means, and offer tips on how to restore the speaker to working order after a reset.  Finally, each post links to other posts on our site related to the subject speaker.

Echo Dot Reset Instructions Posts

Resetting Echo Dot, All Models Posts

First, this group of posts each cover the reset topic for all models of the Echo Dot Alexa speakers.  They offer general info that applies to every one of them.

Further, note that resetting and Echo Dot takes it offline in the Alexa app, although you can still see it listed there.  Thus, resetting does not delete the speaker from the Alexa app.  So if you’re selling it, be sure to, in addition to resetting the speaker, remove it from your Amazom account via the Alexa app.

Finally, if you have no access to the Alexa app, you can deregister the Echo Dot from your Amazon account via the Amazon website at https://alexa.amazon.com/  .   Explicitly, log in there with your Amazon account ID and password, visit your devices list, find the entry for the Echo Dot you’re selling, and follow the screen instructions to delete it.

Next we cover resetting the Echo Dot Gen 1 speaker.  This is the original model of the Echo Dot speaker.

Reset Echo Dot 1st Generation, How To Do It

The first model of the Dot Echo smart speaker is the only model of the bunch that features a physical reset button near the back bottom panel.

Picture of the Amazon Echo Dot 1st Generation, Front Top View.

Amazon Echo Dot 1st Generation, Front Top View

Following, we link to posts that detail resetting the Echo Dot Gen 2 Alexa speaker.

Reset Echo Dot 2nd Generation Help Links

Note that the Amazon Echo Dot Two speaker has no button dedicated to resetting it.  Therefore on this model, you press a button combo to start the resetting process.

Picture of the Amazon Echo Dot Gen 2 in Setup Mode, showing Light Ring with orange blip circling.

Amazon Echo Dot Gen 2 in Setup Mode, showing Light Ring with orange blip circling.

Furthermore, here are links following for resetting Echo Dot 3 gen Amazon speaker.

Reset Echo Dot 3rd Generation Help Links

While this 3rd generation of the Alexa Dot speaker has no labeled reset button, it does have a single button that, when pressed and held in for a few seconds, resets the speaker to its factory default state. Read the following posts for details.

Picture of the Amazon Echo Dot gen 3 smart speaker along with its AC wall adapter.

Amazon Echo Dot gen 3 smart speaker along with its AC wall adapter.

Related Posts

References

Revision History

  • 2019-05-01: Tuned the targeting and added tags.
  • 2019-01-12: First published.