Tag: JBL Xtreme Bluetooth

  • JBL Xtreme Charger Cord Specs

    JBL Xtreme Charger Cord Specs

    The JBL Xtreme (Extreme) comes with an AC charger cord, discussed here.  Moreover, this charger fully recharges the speaker’s built in power bank in roughly four hours.  Then, the Xtreme plays for up to fifteen hours at average volume levels before needing another charge.  So here, we give the JBL Xtreme charger cord specs.  We…

  • How to Factory Reset JBL Xtreme

    How to Factory Reset JBL Xtreme

    This post tell how to factory reset JBL Xtreme,  for returning the speaker to its default factory settings. Factory resetting the Xtreme restores it to default operation. Factory reset clears any earlier paired Bluetooth devices from  memory. Wiping old settings stops the Xtreme from pairing to any close-by active Bluetooth devices. Also, you might factory…

  • How to Connect JBL Xtreme with iPhone

    How to Connect JBL Xtreme with iPhone

    This post illustrates how to connect JBL Xtreme with iPhone, a reasonably simple process once you know how to get to the various iOS screens. With your speaker shut off (Power button dark), run through this routine to pair your Xtreme to an iPad, iPhone, or iPod Touch iOS based device. We’re using an iPad Air…

  • JBL Xtreme Power Cord

    JBL Xtreme Power Cord

    The JBL Xtreme (Extreme) Bluetooth speaker comes with an AC adapter charger, discussed in this post.  Moreover, this power supply fully recharges the speaker’s built in power bank in less than four hours.  And after a full recharge, the Xtreme plays for up to fifteen hours at average volume levels before needing another charge.  So…

  • JBL Xtreme Power Cord Specs

    JBL Xtreme Power Cord Specs

    The JBL Xtreme (Extreme) Bluetooth speaker comes with an AC adapter charger, discussed in this post.  Moreover, this power supply fully recharges the speaker’s built in power bank in less than four hours.  And after a full recharge, the Xtreme plays for up to fifteen hours at average volume levels before needing another charge.  So…

  • Finding JBL Xtreme Firmware Version

    Finding JBL Xtreme Firmware Version

    Here, we give finding JBL Xtreme speaker firmware version instructions.  This is the version that this portable Bluetooth speaker is currently running. Knowing this number helps JBL support personnel wen fixing speaker problems.  This can aid them in troubleshooting speaker issues, bad behaviors, button lockups, pairing failures, and other problems. Note that in the JBL…

  • JBL Xtreme Not Showing Up on Bluetooth

    JBL Xtreme Not Showing Up on Bluetooth

    When you find the JBL Xtreme Not showing up on Bluetooth, this likely means one or more things. The device and speaker are too far away from each other. Out of range. So move them to within a few feet of one another before attempting to pair. Charging is not working correctly. So the battery…

  • How to Hard Reset JBL Xtreme

    How to Hard Reset JBL Xtreme

    This post tell how to hard reset JBL Xtreme,  for returning the speaker to its default hard settings. Hard resetting the Xtreme restores it to default operation. It also clears any earlier paired Bluetooth devices from memory. Wiping old settings stops the Xtreme from pairing to any close-by active Bluetooth devices. Also, you might hard…

  • How to Hard Reset JBL Xtreme 3

    How to Hard Reset JBL Xtreme 3

    We show here how to hard reset the JBL Xtreme 3 power bank portable speaker, to return it to its fresh-out-of-the-box settings. Hard resetting restores the speaker to default factory state.  Plus, it clears any earlier paired Bluetooth devices from memory. Thus, erasing old settings stops this speaker from pairing to any nearby active BT…

  • How to Restart JBL Xtreme

    How to Restart JBL Xtreme

    Shows how to restart the JBL Xtreme Bluetooth speaker to restore it to default factory settings. Restarting erases any earlier paired Bluetooth devices from memory, and stops the JBL Xtreme from pairing to any nearby active Bluetooth devices that happen to be in range. Also, you might restart the unit to get it ready for…